Jump to content
SAU Community

Recommended Posts

Sorry to jump in, I have PM a few people to get info from FAST for my GTR with no reply. Could one on you please run my vin. no. through FAST because I'm sure my car has had a respray and would like to know what colour it was when it came out of the factory. I'm assuming black.

BNR32-003202

KBNR32RXFSL TAA

Also, QM1 ? What colour is that? Where can you get an conversion table?

Thanks.

meshybum - its probably first rego'd in 96 so hence its classified as a 96 model.... it could also have been built during the change over to series 2 where you sometimes get a mix and match.. if your worried then dont bother with it... but if its just cos of the vspec sticker dont be too concerned.. theres plently of ricers who dont know better selling off gtrs as vspecs when they arent

look in the search section on SAU.

Also the car my fren buy has dual airbags. but its a 1996. has series 1 front lip.... series 2 interior.

How is this making sense?

the search button would also answer your question.

But also remember, i aint hard to change a front bar :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...