Jump to content
SAU Community

A Lot Of Gtr And Skyline Parts!

hidashino gen
 Share

Recommended Posts

hidashino gen Enthusiast

hidashino gen

Posted
Posted

Hi all, I really got to clean out all this stuff out of my garage. I AM NOT A SHOP! These are my parts that i have collected (some are not mine) and now i need to get rid of them. A lot of the stuff is for GTR’s, but I also have a few misc items for other skylines. Forumers, please keep all comments to yourself as i dont care for whinging and whining on my thread. if you can get cheaper elsewhere, no-one has a gun to your head telling you that you have to buy from me. PLEASE DO NOT REPLY TO THIS THREAD OR PM ME! I WILL ONLY REPLY TO EMAILS SENT TO [email protected] Parts are in Brisbane and can be inspected on arrangment. Will send interstate at buyers cost.

PHOTOS MAY BE SEEN HERE!

APEXi AX53B60 twin turbo kit for BNR32/BCNR33/BNR34 GTR’s. This kit is BRAND NEW, unused and still in sealed plastic bags. Comes with all gaskets, earls braided lines and sticker to add that extra 10hp. $4900 retails well over 8k!

ARC twin blow off valve kit for GTR. This is the latest model from ARC, the NS type. This kit is brand new and is for the BCNR33 but will also suit the BNR32 and BNR34 GTR’s. $750

ARC grille mount oil cooler for BCNR33. This is the core only and does not include any hoses or oil filter attachments. With minor mods, it should also fit the r32 gtr. $680

ARC oil catch tank for BNR32. This catch tank is brand new and never used. Still in sealed bag. Includes hoses and attachments. $550

ARC air remover tank for BNR32. Cant really explain what it does. Helps with cooling, and recommended for circuit racing. Hehehehe Kier Wilson has one on his car and looks really cool! This kit is brand new and unused. $550

NISMO ENGINE & GEARBOX MOUNTS FOR ECR33 WITH HICAS. These engine and gearbox mounts are brand new and will suit the r33 and r34 2wd, manual transmission vehicles with hicas. Will suit rb20 and rb25 NA and turbo engines. $450

Nismo rear suspension upper link set to suit r32 skylines.. Does not include rear A arm set. 4pcs. These upper links are USED and have different bracing to the standard items. They also use hardened bushes. These are in very good condition. Please see photos. Parts for sale are circled. $250 the set.

Nismo rear stabilizer bush. These bushes are new and never used. These are to suit the R32 GTR standard stabilizer. They are made of hardened rubber and measure 25.4mm in diameter. $25 the pair.

R32 GTR Rear seat. Back and bottom section. In very good condition No rips, tears or burns. However it is a little sun-faded. Suit re-trim. Make me a sensible offer please! In Brisbane and for pickup only!

Link to comment
https://www.sau.com.au/forums/topic/47908-a-lot-of-gtr-and-skyline-parts/
Share on other sites
hidashino gen Enthusiast

hidashino gen

Posted
  • Author
Posted

ooharrgtr, sorry mate, the answers to your questions are, the gauges are sold and the intercooler is a bolt on replacement. no changes needed. i didnt mean to be rude, its just that i think you are the only one that didnt read the post properly. Everyone else has sent me an email as i have requested (highlighted) in the thread. if you have further questions please feel free to email me on [email protected] as i dont come by here that often. thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...