Jump to content
SAU Community

Recommended Posts

i am looking to but a r33 gtr ( series and year model)

colour white or silver

can be modified or stock standard (if mods please list)

low kms (if k's high is engine rebuilt?)how many k's?

body work in good condition and interior in good condition -list if any scrathces and dents

i am looking to pay $40 000 at the most and i would prefer if only sydney people reply.

If you have any pictures of the car it would be most appreciated.

I wont be able to buy until late Nov early Dec but let me know if you are selling because i may buy earlier.

Link to comment
https://www.sau.com.au/forums/topic/48127-wtb-r33-gtr/
Share on other sites

i may have mine for sale by then ( going to japan to bring an r34 ) so when you are ready pm me if like .

lightly modified , exhaust , 18" rims ( or stockers ) , genuine n1 turbos , pfc, rest is stock , has run 11.7 @120 mph at wsid body and interior very good , not the colour you are asking ( burgundy ).70k k's engine was rebuild 6 months ago , new turbos fitted at the same time and new clutch , i'm a motor mechanic and i do all the work on the car , new oil every 3 k k's ( helix ultra 15w50).

its r33 made in june 95 and i have all the jap books with it ( if you can read japanese )

i wont be selling it until i get my r34 though

Link to comment
https://www.sau.com.au/forums/topic/48127-wtb-r33-gtr/#findComment-969850
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...