Jump to content
SAU Community

Recommended Posts

I wouldn't think it would be all that hard. Any decent body shop would be able to do it for you.

What kind of kit are you thinking of getting?? I am looking for a decent kit for my R34, but have yet to find one. The Do-Luck kits are so-so, and I don't know whether Veilside make one for the R34 GTT. Anyone??

bonnet is the same length. the guard is wider. front bumper and rear bumper supports are different. you'll probably need to get adapters made to fit a larger/wider bumper. maybe $100 for all the adapters. also the sideskirts mount differently to the guards on a GT? compared to a GTR, so you'll have to come up with some clever way of makin those fit.

maybe GTR front guard, r34 gtr front fenders and keep the rest as gt and get the standard kit.

yes, but if you are putting a GTR front bumper on the car then the shortened GTR bonnet is rectified innit?

OK dimensionally the GTR bonnet is shorter... but I think it should fit into where a GTt bonnet goes properly as long as you put a GTR bumper on as well to cover the gap... that's what I mean...

yeah you need to break out the angle grinder on that thing...chopskies!!!Not that I've looked into it or anything :)

Either way the GT-t bonnet needs to be modded a little bit. And the GTR front spoiler needs to have some slight "massaging" to get it on without that bulged look from the sides being pinned in.

Okay, so im just going to put a GTR bonnet on it, front fenders, front bar.. it will all work out, the side skirts will be fine, the only thing now is the rear bar, as teh rear flares on the GTR i think the bar will need to be remoulded and pushed in at the tips....

thanks for your help guys :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...