Jump to content
SAU Community

Recommended Posts

ever since putting on my FMIC and EBC whenever i run more than stock boost when i'm excelerating my car makes a flutter sound from the turbo side of the motor, i pulled my stock bov to check it but it seems fine, the cooler pipes are tight but i have not check the turbo outlet pipe cause i'll have to pull the other pipes off to get to it.

what else could it be, the more load the car is under the worse the flutter.

Link to comment
https://www.sau.com.au/forums/topic/49551-help-fludder-sound/
Share on other sites

not sure, but lucky its just a flutter :D

when i put my fmic in it seems to have maxed my ecu. i get a flat spot between 4500-5500 now. i'm gonna have to buy a new ecu (powerfc) or get a piggyback to fix it. much more expensive than i thought it would be :*(

lindsey34 - from what you say, it sounds like this happens when you are accelerating rather than while changing gears.. is this correct?

if so, sounds like a surge issue. I'm not too sure on a resolution. first time I have heard this happen on a stock turbo.

Jaff - all you might need to do is change the spark plugs and gap the new plugs to 0.8mm. go buy some $4 each plugs (ngk copper ones) and make sure the gap is 0.8mm. that should fix your flat spot.

still doing it the more boost the worse it is.

i'm sick of driving with stock boost might call ice and see what they think.

do you think it could possibly be the wastgate causing the problem.

you know when you excelerate how the pod makes the shhhhhhhhhhhh sound well when mine is boosted it sounds like shh, shh, shh, shh, shh, shh, shh, shh ? my brothers car has exact same mods but doesn't do it.

no the gasket is fine.

and I still highly doubt it's the bov.

what boost does this start happening at?

like at stock it's fine.. does it do it at 9psi? or 10psi?

play around with your boost controller.

start at stock and then increase by 1psi untill it starts happening..

and when it does happen, what does your boost gauge do? does it keep rising steady or does it move around when you hear sh sh sh sh sh ???

you are using an after market boost gauge right? not working off the stock gtst one i hope..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...