Jump to content
SAU Community

Recommended Posts

Guys im gonna be running down the 1.4 at WSID this wednesday.

Any tips?..

Never driven a full drift setip car on a 1.4 mile run b4. So dont know what to expect. Any guesses on my time?.

Specs:

Weight: 1400 kg inc my skinny azzz

Power: 170 rwkw approxx

Wheels: 17x9 and 17x8.5 (some german brand on em atm)

Im hoping for a 14 sec pass.. Low 14's

Link to comment
https://www.sau.com.au/forums/topic/50949-cefiro-14-mile-time/
Share on other sites

I got a 14.56 @ 98mph, or there abouts. That was with the old tyres that were on the car from japan, and wheel spin city. But my advice would be let the tyre pressure down. Another mate gained about 0.5sec from pretty much tyre pressure alone.

Even if you dont get a good run, look at the mph, its a better indicator.

From previous attempts (on closed reads :wassup: ) to get the car going from stationary it does spin its nuts off and that was launching at 3000 revs.

But beacuse of the stiff coilovers the car seems to do a jumping jack flash at the rears all over the place. Hmm. Ill do the usual let the tyres out and so forth but dont know much about the stiff suspension?..

launching on a road and a track are completely different.

when you launch u should launch using ur handbrake... also dont flat ur foot... hold to about 3k and let the clutch out.... dont dump it... feather the throttle so ur backing off just a little when its spinning to gain traction and then balance it with more revs etc and once u have enough traction put the foot into its arse and change ur gears as quick as possible :D

OK Boyz.. I did a 14.2 my best time.. with spare tyre in the back + subs woofer, bad launches, Faulty gearbox (all gears hard to get into and crunching) and speakers etc.. pretty much street trim on the car..

Should have been a high 13's but oh wellz... its a drift car afterwall not a drag car. :wassup:

LOL Will post up my sheet soon and a vid of me running it.

here is my time slip. Damn it with the speed i was carrying i should have been a high 13's for sure. What u guys reckon. becuase due to meggala he said that at 98mph would have been a low 14's. But at 100.88 on mine would have been at least a 13.9 or lower. :)

My rection and 60 foot timed sucked. LOL .. not bad for a first go btw. So what u guys reckon.

Im still trying to upload the vid onto sau.

969314_mile_run_142_smally.jpg

the guy next to me was a vl commhore.. Absolute sleeper. It looked like a stock vl.. with bad panels and paint etc. Only found out what he had under the hood when he pulled away from me after 2rd gear. rb25 block with bigger turbo i found out later on. LOL. :thumbsup:

I was mugged i tell ya.. hahaha

meh thats not that bad for the time :thumbsup:

Dr_Drift ran a 14.05 in my R32 with 142.5rwkw @ 93MPH

shows what a launch can do for ur times :)

The soarer ran a 13.8 @ 102MPH but thats a much heavier car and an auto...

it only had 154rwkw

Damn commodores with Nissan engines in them. :thumbsup: At least you know you got done by an import engine though :)

I think perhaps we are all a little jaded now with the 10 sec factor. A 14 sec time and low at that is good. I'd be lucky if my A31 ran a 20 second pass *chuckle*

Damn commodores with Nissan engines in them. :thumbsup: At least you know you got done by an import engine though :)

I think perhaps we are all a little jaded now with the 10 sec factor. A 14 sec time and low at that is good. I'd be lucky if my A31 ran a 20 second pass *chuckle*

My mates call VL's "poor man's skylines" lol!

and i totally agree with your "10 second factor comment"...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...