Jump to content
SAU Community

Recommended Posts

Iputs more torque to front wheels, not sure of %age, but more than 50

Can't be more than 50%, ATTESSA hydraulic pump locks up the clucthes to the front wheels, rear wheels are always solidly connected. So at max pressure best is 50/50.

What does the centre diff button do next to the steering wheel?

Try it on wet grass. When turned off Stagea spins rear wheels for a bit and then feeds some torque to the front wheels and drives off. When turned on, it just drives off straight away, no waiting.

Very handy as the rear doesn't step out in the snow and ice. Not much use to me, no snow and ice in Sydney. Could be handy in the pits with the trailer on the back when it's wet though. The old Foulcan used to sit there spinning it's one rear wheel. Had to get towed to the sealed pit road once at Bathurst, very embarassing.

Just one more reason for choosing a Stagea :D

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012070
Share on other sites

Hahahaha, good one SK, I can see it now, the old Foulcan smoking up one tyre in the pits and everyone looking thinking 'What the hell is he doing !!'...

Anyway, I just found this out last night as I was reading through heaps of Jap stuff on Stagea's.

With the button pressed in, the torque is 50/50 up to 20km/h. After 20km/h it sits at 80/20 (80% rear and 20% front) unless the front requires more, then it can vary up to 50/50.

Very interesting hay... You can see they were designed mainly for snow use (and would be great for pulling a boat out of the water at the boat ramp), and probably explains why you don't feel a big difference when driving normally with the button in.

J

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012334
Share on other sites

jay do you know the addresses of the japanese sites you were looking at?

i searched google japan and yahoo japan and all the sites i keep finding are all the same stuff just the specs some pics of the guy/girls cars and mods etc...

looking for more interesting stuff like what you just posted

:D

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012409
Share on other sites

jay do you know the addresses of the japanese sites you were looking at?

I actually got the link from Rezz's post on the thread you started :D The first link, but it was in a link in that link - if that makes sense !!!

Here's the first link;

http://homepage2.nifty.com/WGNC34/tuningdatetop.htm

You have to click on 'INDEX' for it to bring down a list of other links.

That particular info is the third link down in that link :) - here's the link;

http://homepage2.nifty.com/WGNC34/tuningdouryoku.htm

To read it you have to put it into a translator (bablefish won't work for some reason....). I use this translator http://www.systransoft.com/ after a while you have to register, but it's free.

Then in some sort of Japglish you can make this out at the bottom of the page;

"You handle for the reference and there is this kind of statement in the instruction manual.

At the time (usually time) of synchronizer mode OFF basis: 0: 100 MAX50: Variable control up to 50

At the time of synchronizer mode ON below (when departing) vehicle speed 20 km... 50: 50 fixing

Above (when travelling) vehicle speed 20 km... basis 20: 80 MAX50: Variable control up to 50."

J

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012661
Share on other sites

good stuff jay thanks for the info

am trying to get my stagea site uploaded in the next couple of days

yeah babelfish is crappy i will try the systransoft program and see how i go :D

prank

good idea can you start one and maybe put the dash removal tutorial that shan posted a while back in there and sticky it??

:)

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012693
Share on other sites

so this is a good feature to have when chopping holden utes at the traffic lights in the rain?

:);) ;)

Mate he was soooooo far behind, I leasurely changed lanes and drove along at the speed limit. Still took him a K or so to catch up. Subaru Forresters are also fun, they keep looking in the rear view mirror wondering why this strange waggon is keeping up. KEEPING UP, huh I was looking for room to go around. And then there was 4 guys in 2 WRX's that got whiplash when I went in between them in a roll on at the lights.

I have been having so much fun. :D

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012695
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...