Jump to content
SAU Community

GTR Package 400+kwaw - GT2530 Turbos Injectors AFM's etc

meshmesh
 Share

Recommended Posts

meshmesh Mentor

meshmesh

Posted
Posted

Hi All,

Will sell seperately, but if someones looking to save themselves the headache of sourcing all these parts individually for your street GTR here's your chance..

1) Apexi Power FC (In original Boxes)

Apexi Hand Controller (In original Boxes) Sold - Pending Pick Up

2) HKS GT2530's Including Genuine HKS Uprated ~1bar Actuators Sold

3) Genuine Z32 AFM's, +Tomie Plugs Sold

3a) Genuine Nissan R33 Airbox + K&N Airfilter, NOTE: This Box has been extensively modified to fit Z32 AFM's, for that "Legal Sleeper" look.. Sold

4) SARD 700cc Injectors x6 Straight fit = Sold

5) Custom Front Pipes (off the dumps to the cat) Twin 2.5" into single 3" $350.00

6) + we also have a carbon fibre wing blade from UAS see below: Sold

carbonwingblade.jpg

7) Clear Nismo Side Indicators to suit GTR Sold

All parts are in Melbourne, will deliver interstate, will accept COD "on the condition of a very minimal deposit to aleast cover returns if the buyer doesn't pick up the item and it gets sent back."

Will try to arrange some proper pics asap...Hope that covers everything.

PM or Emailfor me info.

meshmesh Mentor

meshmesh

Posted
  • Author
Posted
might sound stupid but will those GT2530's bolt straight on to a RB26DETT or will you need a custom manifold? and will that power FC work on an R33??

Hi ECR... "yeh that question is a stupid one :slap: " /kidding.

Everything listed is a straight bolt on for an RB26DETT aka GTR.. in fact they all are being removed as we speak off an R33 GTR, so the answer is YES & YES.

MANWHORE Grand Master

MANWHORE

Posted
Posted

got a question.

Not sure if you're willing to separate the turbs, but can you tell me if i can just take one of them and run it on my gtst? like is it a straight swap like those 2530s that other people have been running?

meshmesh Mentor

meshmesh

Posted
  • Author
Posted

Some Items Sold, and Some new iitems added..

For those that have purchased, thanks for your patience you should receive you stuff this week. Any problems feel free to email, PM or call my mobile.

Cheers

  • 2 weeks later...
meshmesh Mentor

meshmesh

Posted
  • Author
Posted

All parts have been sold.. Except for :

- Aftermarket Front Pipes

+ have some other goodies added which I'll start a new thread

Adjustable Cam Gears

HKS (Mushroom type) Pods

This thread is getting a little messy, so I started a New thread with some more parts here...

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...