Jump to content
SAU Community

Recommended Posts

Has anyone replaced one of these, easy/hard. From the looks of things its not so easy. Will I need to remove the dump pipe. How much play is in the exhaust. CAn I unbolt it and then slide it off with the exhaust still attctched to the turbo??

Also found out that my turbo is not a HKS2510 but a HKS2535. hmm maybe time for some new injectors and push the boost up. Thats one good thing to come from this I spose.

Link to comment
https://www.sau.com.au/forums/topic/52351-blown-exhaust-turbo-gasket/
Share on other sites

already got one, plus a monster bosh fuel pump, the thing sounds like a swarm of bees in the boot. I really need to get on the dyno and see I spose. Am getting some cam gears soon so will get those on and run it and see from there if its worth getting it chipped again (been done in japan). Its chewing some feul at the moment, leaving lots of carbon build up on the rear bar so I know its running rich.

Have got a GTR intercooler, oil cooler, 3in from the turbo. As for rwkw I dont know havent run it yet. I would be guessing around the 200rwkw at around the 1.15 bar as a guess. had a run with a WRX the other night he had front mount and exhaust etc and beat him so has some ponies.

what do you recon I can get from the turbo 1.3 - 1.4 bar if I have the thing remapped. I will get a better indication after I put the cam gears on and then run it.

What sort of power should I get from a 2535 on an RB20???

220 -240 rwkw very doable

check th ecolour of your injectors if they are yellow/gold they are gtr injecotrs chances are its been tuned for higher boost take the car to a good workl shop to do the dyno run . 1.4 bar should be doable but i wouldnt run that all day

meggala

sounds like a nice car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...