Jump to content
SAU Community

Recommended Posts

Hi all at the moment i'm in the process of modifing my R33 my GTS-T.I basically got most of the bolt on stuff already which will make things easier.Here are my mods as from today

Front mount inter cooler

Cold air intake on to apexi air pod

Carbon fibre bonnet

Bleed valve Turbo xs type

3'' exhaust from turbo to HKS muffler but excluding cat

Bosch 044 fuel pump (450hp rated)

We are in the process of buying a power fc and controller.But as for now do we go for the upgraded injectors 550cc one or Turbo.If anyone has do similar mods please share info.Like turbo selection etc what are my next few steps.My aim is to get say 300+HP or 250KW at the wheels.

Link to comment
https://www.sau.com.au/forums/topic/52446-steps-of-modifing-a-rb25det-ideas/
Share on other sites

im have similar mods but gonna be chasing round the 300 mark... for 250rwkw id say the gt25/40 would be good? anyone confirm this...get ur injectors, id get the turbo, injectors and power fc and put it all in at once...

fuel reg would be needed im guessin, and id get an avcr boost controller

ben...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...