Jump to content
SAU Community

Recommended Posts

Had the GTR back at the drags last night got a personal best in before the radiator decided to pack it in went [email protected] with a 1.7 60ft. Car is currently making 270rwkw on unigroups dyno in Sydney .

My question is that to me the trap speed seems abit low for this power level specially after reading about other r32 GTR's with similiar power going 117mph plus though the top end ?.

r/t .549

60' 1.784

330' 5.077

660' 7.837

mph 91.48

1000' 10.138

ET 12.104

MPH 113.99

k/mh 183.45

Don't know the cars exact race weight at the time. It's a r32 GTR vspec N1 had about half a tank of fuel and rear plus passanger seats removed. The pass seemed pretty clean didn't miss any changes and shifted at about the right rpms. What do you guys reckon?.

Link to comment
https://www.sau.com.au/forums/topic/52954-trap-speed-vs-rwkw/
Share on other sites

Mate, honestly it sounds about right. If I didn't know ny better though, i'd say thsi post was a total gee up. :P

All jokes aside, if i was guessing what your trap speed probably should be, +/- 10% i'd have to say it's not too far off what i'd expect. I would prob have guessed about 115mph so that's not too bad. Well done for getting out there and racing though :cheers:

Adrian

i have n1 turbos in my r33 gtr , stock injectors ( they are at their limit ) stock cooler , even stock airbox ,ebc and power f/c on 1.2 bar .

i have run 11.7 @120.85 mph , 1.846 60 ft but a lot of wheel spin in first and a little in second .

Yeh must not be much more left in it then, I soppose it's time to lean on these 2530's abit harder then. I'd love to know how these other GTR's with even less power then mine are trapping 117mph plus or maybe the owners are stretching the truth.

Hey wrxhoon hows things. Do you know what type of power you are making at the wheels?. Like I said before there are even a few examples of r32 GTR's on these forums with less power running in the high 11's at 117mph plus , one example would be HIRISK's old white r32 GTR which trapped 117mph with about 250rwkw. I'm alittle frustrated at the moment because everything else is fine I'm just lacking that little bit of top end to be able to reach my goal of an 11 sec pass.

was it you last wednesday at wsid ? i was there with another r33 gtr testing it .

i just noticed you have 2530"s ( i thought you had n1's ) .

i know of another r33 with 2530's he has about 275 kw and hid 12.1 @110 mph but 1.7 60 'in all his runs . we took it and had it retuned but never been at the drags again it will be intersting to see what he does now .

i dont know what power i have but at a guess 300 rkw min .

i wish i could get 1.7 60 ft , mine is not a vspec so that may be the reason for not geting traction .

Hey wrxhoon hows things.  Do you know what type of power you are making at the wheels?. Like I said before there are even a few examples of r32 GTR's on these forums with less power running in the high 11's at 117mph plus , one example would be HIRISK's old white r32 GTR which trapped 117mph with about 250rwkw. I'm alittle frustrated at the moment because everything else is fine I'm just lacking that little bit of top end to be able to reach my goal of an 11 sec pass.

Yep was me at WSID last wednesday white 32 GTR with black wheels. Yep I saw you guys there and I had a funny feeling it was you but wasn't 100%. After what you say about your mates r33 my figures seem pretty right now . Looks like I'll just have to lean on the turbo's more and come up with something closer to 300rwkw for some consistant 11sec passes .

i was there with another gtr , series 3 f33 , this one has gtrs's and i'm trying to sort it out , it has 340kw but could only do 12.4@113mph , the clutch was sliping if you launched hard .the last run we got a good launch 1.8 60 ft but missed 3rd gear, it did 12.4 but 110mph , that should have been 12-12.1 .

the other gtr with 2530's has been tuned since but hasnt been back at the drags , that should do high 11's now .

my car should do low -mid 11 's with 121 mph trap , when i took it there the track was very slippery though .

with a better tune and your 1.7 60 ft + lighter car you should do 11's every day .

if you want a good tune pm me and i'll tell you where to take it .

we are taking the series 3 there on monday , let you know how it goes when we go back to wsid .

i got a feeling that the n1 turbos are much better than a lot of people think they are .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...