Jump to content
SAU Community

Recommended Posts

it might sound easy to get one of these through nengun, but they still have to source one (which isnt easy), then you have to pay shipping and might get stung for duty. overall the wait might be a long time.

as i said, i ordered this through an importer and it took 6 months to find. these are rarer than all other powerfcs (especially in Aus) so you cant expect to get one for the same price as for other cars. i paid much more than 800 for this so im not willing to sell at that price. how about an offer that reflects the availability of this computer??

yes for rb20. look up www.nengun.com and ask them go to performance parts and see just seen today rb20 brand new power fc 1200 buxs wihout controller

maybe so but thats very different to walking to corner store to pick one up. they have to find it then send it. meanwhile you wait for it to be found, then pay for shipping, then wait for it to arrive.

at this price you are paying for the fact that it is in the country right now ready to go.

maybe so but thats very different to walking to corner store to pick one up. they have to find it then send it. meanwhile you wait for it to be found, then pay for shipping, then wait for it to arrive.

at this price you are paying for the fact that it is in the country right now ready to go.

i am not disputing this and no it wont be the same price as picking one up here. the face is that urs is a USED power Fc. No matter how long it was on there for the main thing it was used it is not brand new anymore. i am in the market for an fc so dont think i am just abusing ur thread. u tell me what u think is a resonable price for your fc and we will go from there

ok, well this price has not been simply picked out of the air. it reflects the price that i paid for it, and the fact that i waited 6 months for it to arrive. i thought it only logical that given the low supply i could get a few hundy more than what i paid. anywho, i paid $1400 for this unit and im not going to loose money on this. you can have the unit for that price.

Sorry Mate I Cannot See The Sense In Buying A Second Hand Power Fc For 1400 When A New One Is 1200 I Would Have To Be Out Of My Mind. Anyway Good Luck With Ur Sale Hope It Goes Well I Am Still Interested So If Ur Keen To Sell At A More Reasonable Price For A Second Hand Item Please Message Me :burnout: :burnout:

why dont you try and buy one through them and then tell me how easy and quick it is. also by the time the thing arives it will end up costing well more than 1200. when i was originally looking for this an importer quoted me 1800 to my door. being second hand doesnt matter cause there arent many of these in the country, new or used. im not being tight, im just asking for what i paid. your offerring the kind of money that a used 33 unit goes for. i think thats being tight considering the supply of them going around. it costs more cause they are rare and its in the country now.

i bought a power fc with handcontoller from nengun it took 6 days to arrive on my door and has 12 months warranty, all for $1180 incl freight brand new.

I am about to purchase a power fc pro (air flow meter removal) for the rb20 with handcontroller for $1350 from nengun incl freight.

youre price is reasonable when looking at what you paid, but it is not reasonable looking at the current market on these prodcuts, nengun is unbeatable and is a wholesaler direct from Apexi, i can bet my life he wont have any problem sourcing one.

I bought a playstation 2 when they first came out, cost me $600, I sold it 2 weeks later but could only sell it for $550.

Basically when selling something 2nd hand regardless of the age of the product, the buyer will always dictate the price.

By all means try and sell it for what you paid, but I wouldn't think on here is where you'll do it. It's going to like selling snow to the eskimo's.

Personally i'd cut my losses and sell it for around $1200, because they will only get cheaper i'd reckon. Then you'll get even less.......

Your call :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
×
×
  • Create New...