Jump to content
SAU Community

Recommended Posts

hey guys, i bought a 2nd hand schneider scd8000 headunit a few weeks ago, the backlight display didnt work (due to burnt out globes) all buttons light up fine but just not the back light (doesnt really bother me)

anyway all was fine after the install and working well untill a few weeks later, i started the car and there was no volume on the stereo, the graphic display (which moves to the beat of the music) was working fine and everything else was in order. there was simply no volume, after fiddling with all of the settings and trying a few things nothing worked.

a few days passed and i was getting worried, then one morning i got in the car and it was working perfectly again, but after about 5minutes without driving it randomly without warning shut the volume off again. and hasnt come back on since.

now i doubt its the headunits amplifier, as i should be able to faintly hear music when its turned up fully, but there is simply no sound at all.

so can anyone put a finger on whats wrong?

thanks guys,

Andrew.

Link to comment
https://www.sau.com.au/forums/topic/53669-suddenly-no-sound-from-head-unit/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...