Jump to content
SAU Community

Recommended Posts

damn bloody EPA bastards! i copped the $500 fine even afte only driving it for one week. They reviewed my situation and because i have had an EPA on another car beforehand, i should have known it exceeded the sound limit. So I have to take this to court....lawyer and court costs are gonna be more than $500! what a jib!! So when buying a car, the EPA expect you to get the db level tested! fkn assholes!

So when buying a car, the EPA expect you to get the db level tested! fkn assholes!

I wish you people would all stop playing the victim.

If you want to break the law, don't bitch about it when you get caught out!

It's up to you to make sure that your car is legal, and if you choose to have mods that make it NOT legal, then there's no point crying about it.

:thankyou:

']the point is...i just bought the car. had it been me who got things modified, then thats a different story. a $500 fine is a bit excessive.

You were driving it weren't you?

On the road?

With other cars?

It's not like you were unaware of the fact that it was modified.

NO, but the place that issued the RWC when he bought the car should of ensured the car was legal, is this not the purpose of a RWC, one of the check items is modifications. If he was given a RWC when purchasing the car then surely the mechanic that issued the RWC is somewhat at fault. (assuming the exhuast was the same volume then)

[quote=SKY031

Who cares if he was driving it on not, the bastrads should leave us alone. go do somthing better, rats.

its not like my loud exhaust is gonna kill someone. and the fumes, far out a truck lets out fumes in one hour, what my car would do in like a 10days.

i still havent received the EPA letter.

how long does it usually take?

and the 28days you get, is that from the incident date 28days, or since the day the letter was received/written?

anyone knows better about this topic?

NO, but the place that issued the RWC when he bought the car should of ensured the car was legal, is this not the purpose of a RWC, one of the check items is modifications.

No, this is not the purpose of a roadworthy.

I've never seen a roadworthy certificate that has a section for how loud the exhaust is.... especially considering that testing is only done at a handful of places.

EPA and VicRoads are two totally different bodies.

At the end of the day, owner onus applies.

No point trying to blame someone else.

No, this is not the purpose of a roadworthy.

I've never seen a roadworthy certificate that has a section for how loud the exhaust is.... especially considering that testing is only done at a handful of places.

EPA and VicRoads are two totally different bodies.

At the end of the day, owner onus applies.

No point trying to blame someone else.

Of course a RWC isnt gonna have a 'how load ur exhaust is' section.

The multiple choice sheet doesnt include all faults, thaz why on the right hand side you have space to specify additional faults found, which is the testers responsibility.

As a mechanic you have to specify what the faults are.

and a exhaust that is to load is also considered faulty.

i agree that not many places do have the facilities to check your exhausts DB's, but in a scenario where the exhaust is aftermarket fitted, the tester should send you off to a Licensed Exhaust Tester, to get a certificate that is it Roadworthy.

In many cases the RWC testers forget to check the exhaust, or just let it go, which is wrong under law.

so yeh.

In many cases the RWC testers forget to check the exhaust, or just let it go, which is wrong under law.

....and in many cases they're asked to overlook things too.

Pretty much any aftermarket exhaust is going to be too loud.

But it IS NOT a roadworthy issue.

It is an EPA issue.

Gee... I know, just for something different, why don't we go over the same thing again and again. :argue:

....and in many cases they're asked to overlook things too.

Pretty much any aftermarket exhaust is going to be too loud.

But it IS NOT a roadworthy issue.

It is an EPA issue.

Gee... I know, just for something different, why don't we go over the same thing again and again.   :argue:

this is like a arguement "who came first CHIKEN or EGG"

if the exhaust has got a leak, and leaks out fumes, that should be then still part of EPA and not RWC, but the RWC tester still writes it down as a fault, that need to be fixed.

there u go, EPA is part of RWC mate.

actually SKY031, for your information, EPA told me to take it up with the mechanic that issued the previous seller the RWC. .

BUSINESS NAME REMOVED

http://www.skylinesaustralia.com/forums/sh...ead.php?t=52079

sky031, sorry but it is a roadworthy issue

The rules for roadworthy as I am sure you are aware are covered by the ADR's and VSI sheets.

VSI sheet 8 section 12 paragraph 4

"There must be no escape path for exhaust gases other than the exhaust outlet, AND the vehicle must continue to comply with the noise emission standards applicable to it. "

(direct quote taken from VICROADS website, http://www.vicroads.vic.gov.au/vrne/vrnav....A256B5F007AE7F3)

If the vehicle failed to comply with noise emmission standards it is in violation of this paragraph, which makes it non compliant to the VSI sheet specifications, thus unroadworthy.

Regardless of the excuses, the mechanic should of never issued that roadworthy without proof that the exhuast system complied with noise emmisions.

The onus was on either the mechanic or the person that provided the car to the mechanic to have proof, by not having this proof and still issuing the RWC could be considered at the very least negligent, expanding to fraud if your keen.

In terms of civil liabilites you could consider attempting to reclaim any fines issues in regards to the exhuast that he declared roadworthy, however this would be difficult as the burden of proof would be on you to prove that the exhuast system was fitted to the car at the time the RWC was issued. In the end it probably isnt worth it. However you could inform Vicroads of the matter, they are extremely strict on dodgy RWC's being issued.

I've had to removed the business name for legal reasons.

Slow_r31 I can see what it says on the VicRoads website, but how can it be a roadworthy issue when so few (if any at all) roadworthy testers are able to test for noise?

The places that I know of that do these tests don't issue roadworthy certificates, and vice versa.

Does the workshop who issued the certificate have the right testing equipment?

If they are unable to test for noise levels, then how can they issue certificates on a daily basis, saying that every car that comes through their shop is "roadworthy"?

.....and then there's always the possibility that the exhaust was put on after the issuing of the certificate.

It's the first modification everyone does when they get their new car :)

]

I told ya it is a RWC issue. (Chicken b4 Egg) :rolleyes:

As stated on the VICroads website, it is a RWC issue, and the exhaust is not to leak any gases and MUST comply with the noise level standards.

ahh Yeh, most Exhaust Centres that i know off, issue RWC as well.

And if the place does not have the neccessary equipment to test the exhaust for noise, under law they MUST send you off to a Exhaust Centre, and get you to provide him with a Certificate stating the Exhaust is under 90db.

THis is should be done only if the exhaust is aftermarket, because the Factory exhausts are all under 90db anyways. Thats why RWC testers do issue plenty of Roadworthys on a daily basis because most of their cars have a Standard Exhaust, or the RWC Tester overlooks that item, which makes them at fault, and sets them at risk to loose their LWT Licence.

__________________________

:spcow: ooohhh I KNOW DAT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...