Jump to content
SAU Community

Recommended Posts

... Skylines are cheaper there?

How can that be? Don't they have to convert them to left hand drive? I really don't like the sound of Skylines being so expensive in Australia... well I see them all day every day here in Japan so I guess the image of them isn't as special as they used to be for me...

Link to comment
https://www.sau.com.au/forums/topic/56203-i-heard-that-in-canada/
Share on other sites

I wouldn't be surprised...isn't Canada also RHD. They also have a similar 15yo rule and well also have boring cars in the local market :P

I've said it before if the States were RHD, firstly they'd get all the nice JDM models cars available through the dealership and secondly wouldn't have a problem importing them...and we'd get nothing as they'd probably take anything and everything of the best examples.

So thank your lucky stars we're RHD and can import JDM cars...so all you youngins stop f*cking whinging like a spoilt brat about what we can't import or the changes to the import regulations. You also have to thank, Japan for not going LHD after the war.

I wouldn't be surprised...isn't Canada also RHD. They also have a similar 15yo rule and well also have boring cars in the local market :)

I've said it before if the States were RHD, firstly they'd get all the nice JDM models cars available through the dealership and secondly wouldn't have a problem importing them...and we'd get nothing as they'd probably take anything and everything of the best examples.  

So thank your lucky stars we're RHD and can import JDM cars...so all you youngins stop f*cking whinging like a spoilt brat about what we can't import or the changes to the import regulations.  You also have to thank, Japan for not going LHD after the war.

Canada is LHD same as US. Local cars are pretty reasonably priced in Canada...I would imagine a 2nd hand Jap import would cost more than local cars.

I personally think the changes in import rule are unjust becos it doesnt favour us the consumers. However, NZ has more relaxed rules in this matter, and compliance cost is much less than what we would pay in Oz for cars imported under SEVS rule.

I dont think Jap would go LHD after the war...becos the war was lost to people who drive on the left..so they went right... :aroused:

Its cheaper as they don't have to do compliance. Their import system is almost the same as ours bar that. They also don't have a RAWS based system.

Canadians are allowed to drive either LHD or RHD, as they are both a french colony, british colony and a North American country.

I'm actually contemplating going over there to exapnd out operations, but we're taking baby steps into it atm.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...