Jump to content
SAU Community

FS: MODIFIED White 1994 R33 GTS25t

GiJOr33

By GiJOr33,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

GiJOr33 Experienced

GiJOr33

Posted
Posted

- Exterior/Engine

  • 93,000km's - Condition of car reflects km's (I don't suspect it's been wound back but you can never say for sure)
  • 222kw at the wheels at ~9psi
  • 5sp Manual
  • 650hp HKS Turbo
  • HKS 45mm Wastegate
  • Tuned Length Exhaust Manifold
  • Custom 3.5" Dump Pipe
  • Hi-Flow Cat
  • Dump pipe back 3.5" Exhast
  • HKS Super Powerflow Airfilter on 100mm Inlet Pipe
  • Greddy Profec B Electronic Boost Controller
  • HKS PFC-FCON Fuel Controller (tuned)
  • HKS FCONV Fuel and Ignition Computer (tuned)
  • HKS VPC Air Controller (No need for Air Flow Meter, and tuned)
  • ARC Front Mount Intercooler
  • OS Giken Twin Plate Clutch (replaced Thrust Bearing too)
  • GTR Fuel Pump
  • Cusco Oil Catch Can
  • Potenza Suspension
  • Gold 18" Advan Model 7 Wheels
  • Back - 18" 255/40 90% Michelin Pilot Sport Tyres
  • Front - 18" 235/40 85% Bridgestone Potenza Tyres
  • Timing Belt, all other belts, filters and fluids were changed at 89,000
  • Motul Engine Oil is used and changed every 5000km's along with Oil Filter
  • Redline Lightweight Shockproof Oil is used in the Gearbox which I have changed twice (last change about 3000km's ago)

- Interior/Exterior

  • Factory Electric Sunroof
  • Tinted Windows Darkest Legal F1 Grade Tint
  • Car alarm/4pt immobiliser/keyless entry. Fitted by Mercedes Benz, worth $800+
  • Greddy Electronic Boost Gauge
  • HKS Turbo Timer
  • Omori Electronic Exhaust Temp Gauge
  • Omori Electronic Oil Temp Gauge
  • Omori Electronic Oil Pressure Gauge
  • Nardi Leather Sports Steering Wheel
  • Alpine CVA-1000E TV Headunit
  • Alpine ERA-G100 Graphic Equalizer
  • Alpine TUE-011A TV Tuner
  • Pioneer Front and Rear Speakers
  • Modified Type M Front Bar for increased flow to the Intercooler
  • GTR Side Skirts (I think)
  • Wide GTR Rear Spoiler with working Brake Light
  • All Car Mats

- Other Info

I imported this car from Japan through Prestige Motorsport and had it complianced by Dean at Ultimate Performance Imports and I still have all the paperwork. This car was marked as Grade 4 condition wise but gets marked something else because of the modifications. The car was off the road for 9 months with a blown motor as an injector crapped out and the engine detonated. I had stock ones cleaned and fitted. I pulled out the engine and replaced it with a recently rebuilt RB25 and while that was happening I sent the turbo off to GCG to be assessed, all checked out good. The car was then tuned on the dyno and checked to make sure everything is ok and working properly. The car has been fantastic since.

Selling due to Overseas Commitments

Located in Melbourne Inner East

$24,900 with 11 months rego (In the Trading-Post for $26,000)

--

Cheers,

Andrew

Link to comment
https://www.sau.com.au/forums/topic/56394-fs-modified-white-1994-r33-gts25t/
Share on other sites
  • 2 weeks later...
GiJOr33 Experienced

GiJOr33

Posted
  • Author
Posted

Still for sale guys, I've had lots of interest but no-one serious enough to lay down the cash. I've booked my flight over seas on the 17th January. So make me an offer I can't refuse!

Cheers,

Andrew

  • 2 weeks later...
  • 2 weeks later...
  • 5 weeks later...
  • 1 month later...
  • 1 month later...
GiJOr33 Experienced

GiJOr33

Posted
  • Author
Posted

ok... $22,990. Plenty of go fast goodies on it that would set you back a pretty penny if you were to do it from scratch!

I think this is the kind of car that requires the right buyer as it's not ya standard R33 skyline that you'd look at and say "yep, that's pretty good compared to all the others, i'll take it!". So i'm hoping that buyer is on the forums. It's got heaps of potential with just an injector upgrade and that's it, everything else is done to support 300kw+ at the wheels. It's already got 220kw at the wheels at a lazy 9psi. Imagine running 18psi with the extra fuel supply!!! It would be an animal..... plus the car is no good to me in Australia when i'm over in the UK for a fair while.

PM or email me if you're interested.

Andrew

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

      Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...