Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

SK - does Stagea have a single unit for Auto ECU or is it like the R32 & R33 Skyline where there's a main unit and a secondary auto controller?

Why i'm asking is i'm wondering if the R32 auto ECU would have extra code compared to the manual ECU considering there's a separate gearbox controller.

Thanx

Yeh get the biggest cooler you can get and make sure its mounted somewhere to work efficiently. The auto needs heat to work properly, but too much and it will do damage.

Ill be dismaying some myths to do with automatic skylines/stagea and standard ecu's in general along with sk,

Im aiming more for 240-250rwkw with either a GCG hiflow or GT-RS depending on how much money i have at the time.

The emanage aparantly STILL has problems with burning coils, as much as i hear they've fixed it, is as much as i hear its still blowing coils. :Oops:

IF they have fixed it 100%, then the Emanage would be a better option than an SAFC2+SITC combination.

Im confident i can get a Z32AFM and S15 Injectors running well on the standard ecu with just the SAFC2+SITC. The only other real option is emanage, and they are still very clouded in my opinion.

Either way, things look promising for all the automatic owners :)

I should be finished this project and have results to post in jan/feb :burnout:

I have 190 rwkw and the standard transmission cooler on my 34. It overheated a little once at Wakefield which is a tight track but that was after about 15 laps. Cooled it down and it didn't happen again. Can't see why you would need anymore than that for the street although I should be heading well into the 200's soon and will be thinking about a bigger trannie cooler for the track.

If you fit oversized injectors then you trim a large % of fuel out with the SAFC etc then the ECU thinks its under much less load and the Auto outputs see less load also so keep the trim needed as low as possible.

We use a datascan on the Dyno when tuning hi powered cars with an SAFC and find timing ETC gets out of hand.

  • 1 year later...

When you say to whack on bigger injectors and then trim the fuel down using the SAFC, how are you going to control these injectors? Don't you need an ECU that is capable of controlling the new injectors?

The standard ECU is only programmed to run the stock injectors as far as I understand... correct me if I'm wrong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...