Jump to content
SAU Community

auto window not stopping!

zoom

By zoom,
in General Maintenance

 Share

Recommended Posts

zoom Community Regular

zoom

Posted
Posted

guys!

recently my r33 gtst, the auto window doesn't wnat to stop when going up but when going down it's fine. i think it's to do with the auto window relay.. but i couldn't find it! could anyone pelase help to point me out where to find the relay control unit or any suggestion would be very much appreciated. : :cheers:

Link to comment
https://www.sau.com.au/forums/topic/58962-auto-window-not-stopping/
Share on other sites
Slide Grand Master

Slide

Posted
Posted

the control box is behind the door panel its about 10cmx4x3 and when you wind the window down it clicks.

if it will not stop winding up but can wind down id suggest that when its at the top touch the down button real quick to make it stop or you will burn out your motor

if your in Sydney you can get them from SSS auto in Giraween thats where i got mine from.

if you open up the auto control box and the contacts separate when you let go of the button then its your auto wind up switch .

if it is sticking dont poke with screwdriver cause it will short heaps of stuff.

hope i helped

zoom Community Regular

zoom

Posted
  • Author
Posted
the control box is behind the door panel its about 10cmx4x3 and when you wind the window down it clicks.

if it will not stop winding up but can wind down id suggest that when its at the top touch the down button real quick to make it stop or you will burn out your motor

if your in Sydney you can get them from SSS auto in Giraween thats where i got mine from.

if you open up the auto control box and the contacts separate when you let go of the button then its your auto wind up switch .

if it is sticking dont poke with screwdriver cause it will short heaps of stuff.

hope i helped

is it the control unit where all the buttons/latches are? I have tried my friend's controler unit and it still does the same thing! :Oops:

note that now it basically stop half way until i help to push the window up, then at top where i have to stop it from grinding the gear (by pushing down).

I would think that the limit switch that does it!! i'm still trying to locate the switch! :)

Slide Grand Master

Slide

Posted
Posted

the auto switch control box is directly behind the drivers side arm rest

the clutch in the motor is plastic so id say if the window is not going all the way up now you need a new motor aswell.

if you trace the neg and pos powerwire for the motor and try connecting both ways to a 12volt battery ie.

connect neg and pos one way and then the other way.

if it doesnt move up one way and down then the motor is broken.

The switches that you use for controlling the window are seperate to the control box.

zoom Community Regular

zoom

Posted
  • Author
Posted

The auto switch which locating directly behind the driver side arm rest is working fine! i have tried with my friend's auto switch! I have also tried to supply 12V to the motor and it's used to go up all the way to the top and grind, and now it starts to grind ie. stop and mid way untill help to push the window up and when it reaches to the it grinds again untill i push the switch back down.. :P is there a limit switch within the motor or something? thanks

Slide Grand Master

Slide

Posted
Posted

in the automatic switch box there is a regulated cutout as the voltage drops telling it to stop

if you need to be able to feel 2 clicks pushing it down and up

1st click is for manual 2nd click is for auto wind.

if the switch box does not have the clicks when pushing down and up or if you are able to push the switch down with no resistance then its the switch

if you pull out the switch box and take of the buttons and plastic cover you will see there are very small little plastic notches that are the switches make sure they are lined up with the switch itself

zoom Community Regular

zoom

Posted
  • Author
Posted

the auto switch is fine! i have used my friend's auto switch and it still does it!! there are 2 clicks one for manual and the other for auto.. even when i try with the manual but when it reaches half have the motor grinds, to wind further i have to assist by pushing the window up!! it must be the motor or something!! :)

crate Enthusiast

crate

Posted
Posted
the auto switch is fine! i have used my friend's auto switch and it still does it!! there are 2 clicks one for manual and the other for auto.. even when i try with the manual but when it reaches half have the motor grinds, to wind further i have to assist by pushing the window up!! it must be the motor or something!!  :)

i had the same problem about 2 months backs ,tried everything and turned out it was the motor ,it would get stuck half way up or down and make the most gut renching grinding sound

the gear on the moter was clicking and just stripped it self

i was lucky to find one out in tyhe stiks fo $80.00

wasnt to hard to reinstall just fidgety

hope this helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      R34 Gt Auto Tuning

      By Kinkstaah 路 Posted

      If you want to do the wiring, the GTT engine ecu has the same pinouts extra that the seperate TCM in the NA car has. You can literally grab the wires/pins that lead into the Seperate TCM and wire them into the corresponding pins in the GTT Engine ECU. You could then in theory Nistune it. I realised this when everyone put it in the too hard basket and I actually looked at the f**kin R34 manual. This is after I had previously had a seperate aftermarket TCM controller in my original N/A chassis car and a very built gearbox from a GTT, running a seperate Haltech engine ECU. I ran into this issue when I re-shelled the car into a GTT shell, so my aftermarket TCM was no longer plug and play, because the loom/modules were not present. I was pretty livid when realizing just how simple the original fix actually was. It sat for 3+ years at various workshops trying to find a solution. In practice none of this is a worthwhile idea for a lot of reasons, generally surrounding the shitness of the NA auto, the autos in general that come with skylines, and the NA engine and lack of gains. The gearbox is specced for the 2.5L N/A and barely at that level. If you have to pay anyone any money to do any of this, that is money spent on manualizing the car and it's not even close in terms of a comparison. Learning to drive manual is simpler than going through the pain of dealing with the N/A gearbox and he'll have fun to boot.
    • GTSBoy
      ugently need expert / experienced opinion

      By GTSBoy 路 Posted

      Semi-correction to my blanket statement that you can't bend rubber hoses. It seems that you can get most of a result, by doing as this guy does. I wouldn't promise that the bends will stay in the hose forever. I think if I found they wouldn't stay, I'd get a larger hose and cut some 90掳s out to go over the bends I wanted to be in the smaller hose, as a reinforcement.
    • V35_Paul
      Looking at getting a Tesla style Screen for my V37 Skyline.

      By V35_Paul 路 Posted

      Just a heads up. Mine has just failed. When i turn the car on it just reboots everytime then the word "Android" shows up then goes to a black screen. I've aksed the company i got it from for some help but it's passed their 90 day return so they wont help. I have to swap back to my old system this weekend 馃槶
    • Murray_Calavera
      R34 Gt Auto Tuning

      By Murray_Calavera 路 Posted

      Does the car have to stay auto? If so, you might be looking at a ZF swap in future. 
    • Sleepergm
      Nismo rear spats

      By Sleepergm 路 Posted

      Yeah its tuned relatively conservatively being dynoed at 525hp with every bolt on and top end of the motor built wtih HKS vcam and springs etc. 
脳
脳
  • Create New...