Jump to content
SAU Community

Shitty idle, and longer start?

JH32

By JH32,
in Engines & Forced Induction

 Share

Recommended Posts

JH32 Grand Master

JH32

Posted
Posted

Does anyone else's RB20 idle funny?

Mine will sit at around 600rpm, and then "hunt" up and down between 600 and around 800rpm.

It's really annoying coz it feels like something's wrong.

This has happened since I got it, before any mods (ie. bov, bleed valve, fuel pump).

How can I fix this??

ALSO ...

now that I've fitted the bigger fuel pump, it seems like it's harder to start the car?

It takes longer for the car to start when you have the key turned?

What could this be?

Link to comment
https://www.sau.com.au/forums/topic/6125-shitty-idle-and-longer-start/
Share on other sites
TTT Grand Master

TTT

Posted
Posted

jimih.. all of the above are good points..

I'll add one more..

Also try reseting your ecu.

since you've got all these new mods, you should reset the ECU and then go for a thrash so that it learns things from scratch..

there is a thread on how to do this but here are quick instructions..

**disconnect battery.

**Step on brake pedal until all power is drained and the brake lights no longer come on.

**Plug battery back in.

**Start car, thrash it around for a few minutes around the streets.

**Done.

blind_elk Grand Master

blind_elk

Posted
Posted

"Hunting" could be the early signs of the AAC valve starting to play up. Just needs a clean.

The "start" problem - I was reading last night that too-cold a plug can cause cold-start problems.

blind_elk Grand Master

blind_elk

Posted
Posted

AAC = Auxilliary Air Control (don't people read posts around here? I've lost count of the number of times I've had to explain that). Its at the back of the plenum chamber. Disconnect the orange plug to see if the idle stabilises.

You need to run a lower heat range number. I run a heat range 6. I think you may need to go to a heat range 5. Go to www.ngk.com.au - it has a FAQ about plugs and there is a question specifically about the heat range.

Hicks Mentor

Hicks

Posted
Posted

Do you have some sort of computer ie. S-AFC?

Theres an option you can turn up and down, forgot what its called but its for atmospher bov's(stops the car kinda stalling when the boost is released) when this is on cold start is shit!

I turned it off on my car and haven't had any problems since.

But like others said, it could be your air flow metre.

Hicks Mentor

Hicks

Posted
Posted
Originally posted by GTST

jimih.. all of the above are good points..

I'll add one more..

Also try reseting your ecu.

since you've got all these new mods, you should reset the ECU and then go for a thrash so that it learns things from scratch..

there is a thread on how to do this but here are quick instructions..

**disconnect battery.

**Step on brake pedal until all power is drained and the brake lights no longer come on.

**Plug battery back in.

**Start car, thrash it around for a few minutes around the streets.

**Done.

I read that on another site, didn't know if it was true or not. Didn't have the balls to try, thought it might **** up all my settings.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Wheel refurb?

      By PranK · Posted

      I was wondering about this. I'll do some research.
    • Predator1
      Rb26 iron block limit

      By Predator1 · Posted

      Why not? Since mines been built, I've used low boost maybe 5 times.
    • GTSBoy
      gauge needle removal

      By GTSBoy · Posted

      Yeah, so widen your search to any Nissan speedo first, then go wider if needed. I will say though, that there is a better than even chance that what I said first will likely come into play. They quite possibly won't come apart without damage. I tried to disassemble a stepper gauge that I wanted to repair. There was no way that needle was coming off the spindle, and I could not see how the spindle would come out of the mechanism behind. Assembled once, never to be disassembled, was my conclusion. Could be the same on the R34 cluster. Failing that - take the cluster to a workshop that specialises in automotive instrument work. There's usually at least one in every Australian city. They'll either be able to do it for you for small cost, or tell you it can't be done. It might be that "it can't be done" unless you follow some arcane procedure, including trickiness to glue it back together or something, that only experienced techs know.
    • GTSBoy
      R-chassis INNER tie rod torque spec?

      By GTSBoy · Posted

      Well, given that I, an engineer, almost never bring out the torque wrench to tighten up chassis bolts, despite fully knowing the theory, and instead rely on feel, which I happen to know is exactly how the majority of mechanics do things, should tell you the level of actual peril that exists from not achieving exactly 88 Nm of torque. How about if I just say then that 88Nm is at the lower end of the correct wheel nut torque range? Everyone knows how to tighten a wheel nut, right? And almost no-one ever brings out the torque wrench for that task
    • hardsteppa
      R-chassis INNER tie rod torque spec?

      By hardsteppa · Posted

      Don't be ridiculous. "2-3 ugga duggas or one Oof. You have to use Oof on tie rods because you can't get an ugga dugga on there." Is not helping the guy at all.
×
×
  • Create New...