Jump to content
SAU Community

Recommended Posts

Has anyone here bought an already complied and registered (or non registered) import from interstate and gone through the process of registering it here in SA?

Regency tol me the following:

if its registered in another state (not sure what happens if its complied but never been registered before) and it has been complied under the new RAWS scheme (burgendy coloured complience plate, not a green one), then all you need is to drive the car in and get an ID check to make sure the engine/chassis numbers etc all match up and its not stolen etc. You do not have to do a roadworthy.

The thing that Im worried about, is that if I go in there with tinting, sports exhaust and mags, they will defect it and I will have to do a full Roadworthy anyway! :D

What sort of experiences has anyone here had doing this? Do they just check the ID and leave it at that or will they slap a sticker on it if they are having a bad ahir day?

Cheers

Pete

Link to comment
https://www.sau.com.au/forums/topic/61378-buying-an-import-from-interstate/
Share on other sites

I brought my car in from Sydney, so I can answer your questions.

As long as the car in question is currently registered interstate, all you will need to do to transfer the registration into your name is take the car to either Regency Park or a place next to the Sturt Police Station for a vehicle identity inspection. I wouldn't recommend taking the Regency Park option though...

Regarding having your car defected during an identity inspection, it all comes down to how lucky you are on the day. I have heard of a number of people being defected, however my car went through without a problem. I had a 97db exhaust (keep in mind they inspect your car inside a tin shed), turbo timer, A-pillar guage and a number of other obvious defects. All they picked up were my tinted windows (even though they were down for the inspection), for which I received a 'formal caution'. To this day, I'm still not really sure what a 'formal caution' is. The caution did require a fair bit of sweet talking however. On that note, I would recommend you find out where all your engine numbers etc are so that you can point them out to the inspector. You might even want to give the numbers a bit of a clean so that you can clearly read them. You want to minimise the time the inspector spends under your bonnet. Also, be nice and talk to them about the weather or something. It'll help.

If you are unlucky, then yes, you will be sent to Regency Park for a full roadworthy inspection. If you don't want to take the chance, remove the obvious defects and you should be fine. I have never heard of anyone actively searching for defects during an identity inspection.

And hey, it's easier than buying from Japan...

sweet, thanks for that.

Bout the only thing they might not like is the exhaust, as there is no turbo timer, guages etcetc. So that shouldn't be so bad after all then.

Whats this place next to Sturt Police Station? Ive never heard of it or Sturt before for that matter. Is Sturt a suberb in Adelaide or a town?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...