Jump to content
SAU Community

R33 gtst exhaust

agentJ

By agentJ,
in Queensland

 Share

Recommended Posts

agentJ Explorer

agentJ

Posted
Posted

Hi guys,

I am looking for a 3" exhaust system from the manifold back, dump/front pipes, high flow cat and cat back system. Doesn't have to be stainless and the quiter the better, oh and i would prefer not to have a cannon with 4 inch tip :).

I'm wondering if someone can tell me a good shop to go to in Brissy and what sort of price i'd be looking at?

Thanks in advance :cheers:

Link to comment
https://www.sau.com.au/forums/topic/61689-r33-gtst-exhaust/
Share on other sites
strutto Grand Master

strutto

Posted
Posted

Probably best off trying for a 2nd hand Jap cat back in the WTB section or one of the numerous import spares places around... And then grab a dump and cat from BATMBL on these forums...

Fit it all your self in your garage and I reckon you'd have change from $1000... Cut corners dodgy //GC style and you'll have change from $500 :cheers:

Link to comment
https://www.sau.com.au/forums/topic/61689-r33-gtst-exhaust/#findComment-1164369
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...