Jump to content
SAU Community

Recommended Posts

If Anyone is in need of a Install of there stereo components call Civilized Panels Trading as Civilized Sound & Audio, we do........

-Head unit installs

-Custom boot installs

-Speaker installs

-Amp and Sub installs

-All custom Stereo work.

All work is professional and guaranteed.

Call us for whatever you may need.

David 0404 802 479

Leon 0439 400 388 or email us at

[email protected]

And if you need any Panel/Paint/Panel Beating Call CIVILIZED PANELS,

Shop 2/3 Luisa Ave Dandenong South 3175

Ask for Clive, 03 9706 4060

Link to comment
https://www.sau.com.au/forums/topic/6239-civilized-sound-audio/
Share on other sites

Originally posted by Zila33

Civilized Sound & Audio Show Car

I saw that car.. prolly on the same day that pic was taken... very nice :cool: ! I'm thinkin of a boot install for my 33.

You guys done any 33s before? I'm thinking amps in the floor, and subs behind the tail lights angled toward the middle of the boot. I've been quoted $1200 which includes 2 Fusion amps. Can you guys better that?? I've got everything else ready to go (ie 2 10" JLW3 subs, splits, etc). Just need amps.

  • 2 weeks later...

The amps were 2 Fusion FP-402. Rears running off the deck (I don't like the idea of this). The dude said around $1200 to put the amps in the floor (including the amps) and subs in each corner with carpet over the top to make it look stock.

If I can get the amps, what would you guys charge for a similar set up?

Originally posted by ultim8DTM5

running rears off the deck dont matter, you dont sit in the back do you?

rear fill = not important

Sorry I disagree. If the speakers are there they may as wel produce the best sound possible. Every setup I've heard (while sitting in the front seat) with rears running off the deck produces this annoying (although very faint) distortion. It just sh1ts me.

It all depends on how powerfull your rear speakers are, you would only want to run 140watt max speakers of the deck otherwise they deck wont have enough power to run the speaker and this will cause distortion.

Lets say for example you did run 140watt speakers of the deck then you can always fade them more to the back and this way it wont be faint.

I would prefer to put a 6inch or 6x9 4 ways in the back with about 200watt max and use a amp to rum them, this way it will produce a crystil clear sound and let the subs produce the bass. Runing the speakers of the deck is always goining to be cheaper as you dont need an amp.

riggaP, if you like give a call after 5 today and we can work somthin out for you, im sure we can do you a good deal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
×
×
  • Create New...