Jump to content
SAU Community

Recommended Posts

Here is a list what i have done in the last three days

Keep in mind I did all this without any help.

Auto box is sitting next to the car...

motor sitting in engine bay but not bolted in....

crank is different to the engine i pulled out...fark...need a manual

get clutch

fit clutch

get pedal box and clutch master and slave cyl from r31 and 200b and modify to suit application

manual in...

all anciliaries bolted to motor

gearbox is 5inches shorter than the auto

fark....manual out.....run around like an idiot looking for a long 5speed(impossible to get one atm)

find out that crank is NOT different...

there is an adapter on the end of it....pulls off with two tyre levers

put auto back in....

realize that i cut all the lines that the auto uses when i took it out as i wasn't using it

run around like an idiot again to find the cooler lines...

find some at murrarie.

remove clutch master slave and pedal and go get auto lines.

go cruising Sat night in Nismogirls car.....

get a defect in my bog stock silvia

fit auto lines to gearbox....remember that the motor doesnt have an oil pickup in it yet...

undo engine mounts

lift engine and remove sump....

go 1/2 way to toowoomba to get oil pickup

fit oil pickup

fit sump...lower engine....do up engine mounts...

fill with oil...fill auto with tranny fluid

fit tailshaft

try to start car,,,....nothing

find that wiring is all wrong on the auto...

fix wiring...try to start car....

car starts.!!!....exaust isnt done up.....FARK its loud!

turn car off.

fit exhaust

start car.....runs on 5 cyls only.....

begin diagnosis

find that no2 cyl is not firing.....

plenty of spark.....

check exhaust....no popping....not a valve

must be fuel suply to Injector....nope...plenty of pressure..

guess that injector must be the problem...remove injector(cvnt of a job)

replace injector

start car...WOOOOOO firing on all six!

fit radiator and hoses

fit fan

fill with coolant

let the car idle for 20 mins

not getting hot, go for a small drive....temp on 1/3....sweet

sit down and relax

What motor are we talking?  And which car?  The coupe or the sedan?

I cannibalized my Hilux project and pulled the L24e from it and fitted it to the sedan.

The hilux is now a no go. It will be sold for next to nothing, or dumped. I need it gone, so I can begin on the coupe.

Nope. Springwood. That's the issue.

Jason jumped in our car at springwood, cruised around all night, got back to springwood, and drove his stock standard ca NA silvia the 100m to Springwood maccas and the cops pounced on him even before he got out of the car. His numberplate isn't visible to australian standards apparently.

They said that my plates were ok along with the commodore beside us. They were targetting each and every silvia that came into the carpark sat night. As soon as one came in, they pounced.

Pretty pathetic.

actually.. friday night too i saw them around there too.. they were doing over a commodore.. so least it's not *all* the imports.

I think they are on a big revenue raise.. why exactly I don't know.. It's not as if a lot of the fatal accidents involving imports have been in QLD at all.

Its ok Jason, I whinged for you

From http://www.boostcruising.com/journal/entry.../7/no/3617.html

theredkrawler200501300212journalfile10.jpg

^~^~^~^~^ - This here is why cops suck. The guy left his girlfriends dead stock automatic CA18 powered non-turbo silvia at Springwood and hitched a ride with us down the coast. Once he returned he drove the massive 100m up the road to Springwood Maccas to have a yap before heading home.... Unfortunately a pair of chumps wearing badges decided his car was defectable for his numberplate. Never mind the fact its dead stock with the numberplate fitted in the factory position, these guys decided a defect was definately neccesary. The reason given was that the plate cannot be read from a 45 degree angle at a distance of 20m. Im assuming this is because that is the angle required for a speed camera or red light camera to identify your numberplate and send you a nice revenue raising bill in the mail. Plenty of local cars in the carpark also suffered from this identical problem, specifically an Astra sitting two carpark spaces... In the meantime, countless rust buckets oil-smoked their way through the carpark. So yeah, just a warning to you silvia owners - check your numberplate position. Dunno how you are supposed to rectify this situation (but then again neither did the pair of chumps), so maybe a call to department of transport to clarify the laws on this? As a side note, if the owner of a red celica with a GT-FOUR bonnet (prehaps the whole car is a GT-FOUR but I didnt take enough notice) notices any dents and scratches on the passanger side of the bonnet, its because one of the chumps dropped his copper issue bum-bag utility belt thing full of heavy shit on the bonnet. A pity the night was ruined by the most roadworthy and legal car of all of us getting an unfair fine, but thems the breaks. Hopefully he can succesfully contest it as it would be pretty crap if a car can be legally complied with a defect like that. Anyway, feel free to whinge... I sure did.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...