Jump to content
SAU Community

Recommended Posts

Ok,

So, if you really want your car to shoot a flame out (like a few feet) here is one way I've been told. I've also been told not to use it on the street, which I'll explain in a sec. I wouldn't do it myself.

As you are flooring the car getting ready for a shift, you set up your management to continue fueling as you push the clutch in (and back off for that second) as you go through the gears. It also retards the ignition which keeps the turbo on boost, and shooting raw feul out the back (which will catch fire if the exhaust is hot enough). Runs great, and heaps of fire (think v8 supercars). Cat, no cat, its doesn't matter, as long as you have a resonable sized pipe.

The downside is if you are driving down a hill, backed off, the car will still be feuling - which means the turbo will get HOT. Apparently even coasting down a hill for 30 secs or so can make a turbo glow red and fail.

Another system is to shoot a flamable gas (nos?) out the exhaust from near the diff, using a spark plug to ignite (ah lah Fast and Furious).

not that i'd bother...

That description doesn't just make a pop, its a rather big bang.

I don't think its harmful for a little pop every now and then, most skylines I know seem to have always done it....

You do not need to pump other gas into the pipe to create a flame, I've seen kits that work on a coil pack and a spark plug. They simply spark in the exhaust tip and bang, you have flame. Don't forget boys and girls, those gassesfumes are flamable!

http://www.flamethrowers.com.au

Rice anyone? Ooooh yar, 2F2F....

cars with a cat wont... some cars cats might be badly degraded (if its been on there for a few years etc) so you might get a flame.

Mine flames on the odd occasion... i think. Whether it makes it out the rear end or not i dunno. No-one's ever seen it.

You can tell the difference between a pop and a flame.

The sound is a tad different between the usual pop, and when the fuel catches.

not ture, i have a cat and i get flames (view the sauwa/silviawa cruise video) unless my abuses over the years has eaten it up

Pre-86 cars :(

In NSW (and ACT, which uses the NSW rules), an engine conversion on a car built from 1972 onwards has to meet the emmissions requirements of the year the engine was built in. Cars built prior to 1972 only have to meet the emmissions of when the car was built.

So - if you were to take a 1985 car and put an RB engine in it, you would have to run an exhaust choke... sorry, "catalytic convertor". I think it was the CEO of Lukey mufflers who commented that the best flowing catalytic convertors flowed almost as well as the worst flowing mufflers...

In my case, I can run aftermarket injection, play with cams, turbo etc. etc., and as long as I meet the CO/HC limits for 1971, I don't have to worry about the EPA.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...