Jump to content
SAU Community

Redline Performance Cruise For The Salvos – Biggest Event Of 2005 13/03/05


Recommended Posts

the cruise it going to shikjuku.

BTW my favourite line was this:

we are on show to the country via channel 9 to show them that the modified car industry is not full of hoons and people that care about the community.

apart from that good luck with the cruise. good to see someone trying to do something for a good cause.

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

http://forum.hot4s.com.au/messageview.cfm?...&threadid=30013

Date: 13th March 2005

Meeting point for sydney : P6 carpark

Time: 10:30

Meeting point for central coast : To be advised

Time: 11.00

Meeting point for newcastle: Newcastle Knights stadium carpark where there will be a representative of the cruise in charge there

Time: 11.00

The final destination is at Bateau Bay sports and rec fields (also known as EDSACC).

well i guess that means us coasties will be at edsacc at 1130, no use going to the twinys cause then it would mean going up to warnervale doing

"u" turns and coming back down the free way.

unless we meet up with the newie crew on their way down the freeway.

well i guess that means us coasties will be at edsacc at 1130, no use going to the twinys cause then it would mean going up to warnervale doing  

"u" turns and coming back down the free way.

That's what we've done every other time man... just shoot up the freeway from newy, turn round after the caltex and then come back down the freeway to the caltex going back towards newcastle... it's easy :P

ne more know what time the cruise finishes @ s.o.p cos  i need 2 b  @ the superdome  4.45 pm.

gtrsrule - Not sure when it will finish but as a guess i would say 16:30 to 18:00

I guess we are leaving Sydney @ about 11:00 to meet up @ Wyong @ 12:30, does anyone know?




  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...