Jump to content
SAU Community

Wsid 9-2-05

Eav00l

By Eav00l,
in Events Archive

 Share

Recommended Posts

benm Grand Master

benm

Posted
Posted

Well my first time back at wsid in about 8mths with high hopes and that's where it ended. My car is now running better than ever and once again I still couldn't grab a decent time, I feel like headbutting a brick wall :(

I did manage to get a new PB but only by literally a bee's dick.

1. 14.489 @ 94.84mph / 2.190sec

It felt nice and smooth, launch was the usual but for some reason I was -way- down on mph, I didn't even miss a gear :D

2. 15.265 @ 100.23mph / 2.737sec

First run after a 30min rain period. Absolutely no grip on the greazy track and simply bagged em up!

3. 14.145 @ 102.07mph / 2.167sec (<- new PB)

Tried to slam the gears harder, felt smooth once again and managed to get a new PB (old PB was 14.163 @ 100.20mph / 2.148sec).

4. 14.252 @ 100.87mph / 2.166sec

Once again was trying to work the gears hard but was slightly slower even though it felt just as good *shrugs*

5. 14.571 @ 98.02mph / 2.184sec

Used low boost this time (7psi) just for shits n giggles (even though high boost is only about 8-9psi haha).

As you can see my launches are pretty much spot on everytime (even though 2.1xx sec is not overly impressive atleast it's consistent). Sure I could grab some semi-slicks or even drag nitto's etc and probably shave off a tenth or 2 but I shouldn't need to when i'm making a solid 195+ rwkw. I'm a good 0.5sec off the pace of where I believe I should be (and the times others are doing in similar powered cars) and im stumped as to what it is (obviously it's the driver).

Was a great nite of racing (besides the rain periods). Some awesome cars about and probably the biggest meeting i've seen in a good 5-6mths. Wish I left my car in the carpark and spectated instead.

Link to comment
https://www.sau.com.au/forums/topic/64153-wsid-9-2-05/#findComment-1203612
Share on other sites
Eav00l Proficient

Eav00l

Posted
  • Author
Posted

i only ended up getting 240RWKW

need to lower compression gonna get a steal head gasget, that will bring her up to the 290 mark.

im gonna buy some slicks soon, just gotta find out how to fit them without removing the brakes, 16" is the only size that can go on.

any1 know where i can get piks from last night??????

Link to comment
https://www.sau.com.au/forums/topic/64153-wsid-9-2-05/#findComment-1203992
Share on other sites
Eav00l Proficient

Eav00l

Posted
  • Author
Posted

mods

td06 20G

Greddy Manifold

HKS 50mm External Wastegate

FMIC

Custom Plenum

550cc Injectors

600HP fuel pump

Nismo GMAX twin plate clutch

Power FC

Q45 AFM

KN Air filter

Sard Fuel Pressure reg

Coming

Head gasget

Forgies

Rods

Cams

Big F**K off turbo

Link to comment
https://www.sau.com.au/forums/topic/64153-wsid-9-2-05/#findComment-1204002
Share on other sites
BU5TER Grand Master

BU5TER

Posted
Posted
i only ended up getting 240RWKW

need to lower compression gonna get a steal head gasget, that will bring her up to the 290 mark.

im gonna buy some slicks soon, just gotta find out how to fit them without removing the brakes, 16" is the only size that can go on.

any1 know where i can get piks from last night??????

Sorry mate as I've said several times in the past the 20g wont flow enough to make 290 its impossible, maybe some decent drag radials would be better then slicks as then you don't have to worry about the added cost of front runners

Link to comment
https://www.sau.com.au/forums/topic/64153-wsid-9-2-05/#findComment-1204051
Share on other sites
 Share
Go to topic listing


  • Latest Posts

    • RB25inside
      Compatible rear drive shafts R34 N/A?

      By RB25inside · Posted

      UPDATE: Yes the GSP Axles are compatible. I installed it on my R34 today and they are working a treat! Turns out that the S13, S14, S15, and 200 SX all used the same axles as the HR34, and ER34 NA models. Which is 2 bolt x 3 pairs.  
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Also build this EH ute with 370z motor and gearbox with a couple of turbos just for fun.  
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Got the passenger door on plus the master cylinder and booster. Loaded up to take it home. At home, the colour changes a lot in the light.
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      Nothing cheap, but I have seen the AC Hydraulic DK13HLQ which is pretty close to what you're asking for. The problem is the hydraulic cylinder mandates that the back of the jack be a certain height and Skylines have fairly deep inset floor jack points. A more certain and cheap option is to get some nominal 2x10 inch lumber boards and have one board be 1.5 feet, the other board 3 feet. Glue it all together with lots of clamps to maintain pressure. Make two of these. The ramp suggested above is a good idea, it takes quite a bit of clutch slip to get over each of the boards. I only need the first ~1.5 inches for my low profile jack on a standard ride height car but a lowered car you want to go up to the full ~3-3.5 inches. Paint it or store indoors if you want it to last.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok. And Nistune? I read (here too) mainly on Stagea threads that it can by "turn off" with Nistune. But they say they still had the sensor plug in. Next week iam going to the Nistune(and other ECUs) tuner so i can finally make it work. I drove the car home and apart from the cut it drove great. No misfire no smoke no hesitation or rough start...so hoping it is this sensor that is missing  
×
×
  • Create New...