Jump to content
SAU Community

Pod Filters

Kor'axis

By Kor'axis,
in Engines & Forced Induction

 Share

Recommended Posts

Eug Grand Master

Eug

Posted
Posted

There are heaps of debates over the filters (pod or panel) and how good they actually

are for your car.

chicane is right - partition it off otherwise you will be sucking in ALOT of hot air coming off

the engine.

The debate is; that some filters have very good air flow but poor filtration, thus getting

dust and particles into your motor, where as other filters have poor air flow but are doing

what they are meant to be doing and that is to FILTER particles and crap. It will depend

on where you live, ie. dusty area, or nice clean area.

Best you can do is keep it oiled, and build a nice solid partition to keep heat and unwanted

crap out. You can buy one for about 150ish or build it yourself, I just recently built one myself and you can stick on hand in the engine bay area, and other in the pod partition area and really notice a difference in temperature after a spirited drive.

K&N, Blitz, Apexi, Unifilters - they wont vary by very much, the most you'll get is an additional or negative few kw

Eug

Link to comment
https://www.sau.com.au/forums/topic/64217-pod-filters/#findComment-1205054
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...