Jump to content
SAU Community

Recommended Posts

Chris32 may be able to be of help as he is running GTR injectors.

You could work back the calc and find out the lag time via his compensation values.

I too am interested in the stock specs as I am about to fit larger injectors to mine.

With power FC for standard injector's you just set them back too 100% and 0.00ms as long as its a RB20 PFC.

Yep thats a firm....

And this is using the PFC calc for GTR LI type. Treat as base point only. Remember these modifications should only be carried out by a qualified technician.

Press. Timing Lag Flow

@ 2.55bar 0.579 -0.15ms (440)

@3.05bar 0.577 -0.12ms (485)

@3.55bar 0.580 -0.14ms (525)

TT

thanks targa for the info.....so at base pressure if i put the injecotors in and use 61% injector compensation on all six injectors and change the lag to -0.15 , it should be ok to crank over and idel half decent??

So is it fair to say, that the rb20 270 cc injectors have a lag of 0.922ms campared to the gtr 440 injectors which have 0.772ms at base pressure???

Also i put my pfc in last night with the stock injectors, its starts but idle is rough as guts. I did the recommended things from the manual....let it idle with no electrical load......then with the demister on.....then with a/c.......but it was still rough as. Anyone got some tips?? also it had a huge flat spot at 2000rpm. I wanna be able to drive it from home to the tuner.

i just wanna have everything ready for the tuner so all he has to do it tune it when i get the car there.

Cheers

hey cubes.....i didnt initialize it, as it was brand new out of the box....but i'll hook it up again and see how it goes....all i did was switch the boost option off and start the car from there.....

when u intialize do u switch the car off then back on???

Not having a go at you dude, but why not just drive the car to the tuners without the PFC, pull up out the front, lean over and plug it in and tune it. Im sure you can cosmetically fix things up when you take it back home i.e. put kick panels back etc etc.

yogi,

Yep, when you initialize you then switch off the ignition and back on again.

When I initialize mine it sets the boost control option automatically off.

If you need to compare any base ign,fuel map settings let me know and i'll take them down and post them up.

If you have warm starting issues drop in another 5ms in to the cranking section of the settings menu.

From memory 80+degree's defaults to 4ms. Set this to 9ms, continue adding 5ms until you get down to around 30degree's or what ever it is.

Cold starts on mine were perfect, just the warm starts that were a bugger.

Thanks for the help cubes.....i will give it another go tommorow and let yas know how it goes. :D

Hey sproosy the only reason i need the pfc to goto the tuner is because the car is having 440cc injectors and resistor pack installed. The car will run like a bitch with the stock ECU and the 440's, if it runs at all.

Cheers

Chris32 may be able to be of help as he is running GTR injectors.

 

You could work back the calc and find out the lag time via his compensation values.

 

I too am interested in the stock specs as I am about to fit larger injectors to mine.

As the other guys said - stock injectors, just set the values back to zero

When I installed my 440cc GTR injectors and resistor pack, I started it with the stock computer, as I figured if it was wired wrong, I'd rather torch a stock ECU than the PFC. It started first crank, but as expected, ran as rich as one of those big ass racing trucks :D

Also did the same with the Z32 AFM, it started ok as well

One thing to all 32 PFC owners, when you get it tuned, make sure the water temp correction settings after 60 degrees are set to 0.00, otherwise your car will detonate if your water temp starts to rise. Found this out at a track day, as my car was always at about 70-75 water temp when it was tuned.

After a few blasts, the water temp would get up to 80-85, and due to there being water temp correction (making it slightly richer up to this point) adjustments up to 75 degrees on my car, after it got a bit hot there was no correction, and hence the car actually leaned off and started to detonate.

Its not hard to fix, just that with the correction on, the injector map isn't a true representation of what is being measured on the dyno, as its taking the injector map and adding fuel for certain water temp values. Of course, this is needed for cold start etc, but once your car is up to running temp, there is no need for such correction

Targa Tom, any joy with interfacing a GTR air temp sensor? I heard with FClogit, there is air temp correction, which would be bloody useful if you could interface a air temp sensor

Chris

i was looking at doin this too chris....trouble is tracking a GTR air temp sensor first (or buy a new one)

Interesting to note is my PFC is using a q45 afm (and is set as a std r32 one) and has 550cc injectors installed, but has no injector correction, or lag time set....Got me confused how it runs, but its not been properly tuned yet by Shaun...

odd, you'd think it would run like a pig

the injector correction is for when its running in closed loop, lag time i am not sure about, just set it to what I was told to set it too what it is now

I guess Shaun just tuned around all these things?

yer...he did a damn good job, because he couldnt get it to idle at first, then add the larger afm, and the pump / injectors for the run in. I then went for the power tune, and the damn muffler is too small (from a reputable exhaust shop in the city) so i had to upgrade that too....

Just waiting to get it fitted, then im back into see Shaun. It does run perfeclty well however setup as it is (apart form a slightly high / hunting idle (aac me thinks))

Go the straight thru 3.5" like I got done mate :D Guaranteed to wake the dead. Only the rear 'muffler' if you could call it that!

Mine back in next few weeks fingers crossed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...