Jump to content
SAU Community

Have you ever heard that cross drilled brake rotors crack? Here's the story...

adznight

By adznight,
in Victoria

 Share

Recommended Posts

adznight Newbie

adznight

Posted
Posted

Hi all, after speaking with DBA (as I need new rotors) I thought I'd ask why cross drilled rotors are only recommended for "street use" because I know a lot of people wonder why this is the case and what will suite them. The E-mail reply was as follows...

Question -

"Just one more question. I know that cross drilled are not recommend for track use, is this because of the weakening effect on the rotors or is it more a liability thing? I have heard of cracking of the discs but realistically what sort of braking are you going to have to be doing to cause this?"

Reply -

"Adam,

the reason why we don't recommend cross drilled rotors for racing or track work is due to the following:

The disc rotor face surface area is reduced due to the holes and as a result this face heats up faster under braking.

Once you release the brakes the rotors cool very quickly due to the holes.

Due to this rapid heating and cooling of the rotor face it is possible for the rotor face to sustain what is known as heat shock.

Because the rotor is unable to heat soak and dissipate heat evenly the face of the rotor can develop cracks around the holes.

The use of slotted rotors allows the disc to heat soak and cool more evenly so the rotor is less prone to suffering from heat shock.

Heat shock can be evident in cross drilled rotors even when used by an extremely energetic driver on the street. If the drivers driving style is fast with rapid jabbing of the brakes and exallerator pedals he/she will be more likely to have problems with cross drilled rotors. Due to this reason we recommend the fitting of cross drilled rotors for looks only and improved braking performance under normal driving conditions.

I hope this answers your question, but if you have any further queries please feel free to email me.

Kind Regards,

Aaron Franklin

Technical Sales Advisor

Disc Brakes Australia Pty Ltd"

Thought this might be some helpfull info!

inark Grand Master

inark

Posted
Posted

so is it safe to assume from that that cross drilled AND slotted discs will be less prone to this?

"The use of slotted rotors allows the disc to heat soak and cool more evenly so the rotor is less prone to suffering from heat shock"

R32Big_boy Veteran

R32Big_boy

Posted
Posted

The cracks would still form around the cross drilled holes inark beacuse the change in temp would still be significant. The only way to go on the track is slotted. Do they make 5000 series for the 34 yet adz?

RTFGTR Proficient

RTFGTR

Posted
Posted

I failed my RWC for the first time because I had drilled rotors with 1cm - 2cm cracks on each hole nearest the edge of the rotor... they looked sweet but the funny thing was I passed my Engineerring Cert. but not the RWC.

prae Rising Star

prae

Posted
Posted

From what I've heard the DBA rotors were drilled after they were fabricated? While the Porsche and other high-end rotors had the holes cast from factory?

Drilling post-fabrication gives less structural integrity doesn't it?

I could be wrong though..

inark Grand Master

inark

Posted
Posted
Because they aren't $200 rotors like DBA are...

HAHA good point.

so in other words his statement is only relative to DBA rotors... not in general

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Well, this, but braided line to the sender that is mounted on the chassis. Oil Pressure doesn't need to be close, while I prefer Oil Temp is in the active oil flow (bro science, not sure how much it matters).  That's how I've had mine set up for years and it works OK
    • Duncan
      Second time Skyline owner (R33 GTS-T and now a V36 370GT)

      By Duncan · Posted

      Welcome back! There is a v series forum, a little quiet at times but every new active member helps
    • Duncan
      Starter motor replacment teeth count.

      By Duncan · Posted

      But, per MBS206's question, what happens when it doesn't start. When you turn the key to IGN, do the dash lights come on (then go off after a couple of seconds) - likely alarm or other electrical issue When you turn the key to STRT do you head a clear click (the starter solenoid trying) without the engine turning (likely starter motor)
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
×
×
  • Create New...