Jump to content
SAU Community

Recommended Posts

hey guys

im lookin at gettin a new car after i sell my skyline...

what would win in a race?

a Twin Turbo 300ZX...or a R33 GTS-T, or a 95 model v8 commodore?

also...is a HKS Super dragger exhaust any good???

and if my right front wheel has been moved back due to a accident, how hard is this too fix?? What do i exactly need? the left one seems fine, its just the right wheel that has been moved back

and does it matter if i keep redling the skyline during every gear change?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/65858-a-few-questions/
Share on other sites

a Twin Turbo 300ZX...or a R33 GTS-T, or a 95 model v8 commodore?

what kind of race?

is a HKS Super dragger exhaust any good???

its not too loud and flows well,. // i guess its alright.. :confused:

and does it matter if i keep redling the skyline during every gear change?

lets use a bit of common sense with this one eh ??

:D:D

Link to comment
https://www.sau.com.au/forums/topic/65858-a-few-questions/#findComment-1229684
Share on other sites

Ive got a R32 gts t and only running 7 psi ( standard ) but with chip and ECU upgrade and i can tell you that i blow the VR - VS - VT V8's off the road but a twin turbo 300 has a slight pull, but for handling and comfort along with pretty good performance go the R33

Link to comment
https://www.sau.com.au/forums/topic/65858-a-few-questions/#findComment-1231287
Share on other sites

oh yeah one more thing BLOODY OATH IT MATTERS IF YOU REDLINE EVERY GEAR!!! you shouldnt really redline any gear if you wanna look after your car and the launch into the next gear is never at redline anyhow.

Link to comment
https://www.sau.com.au/forums/topic/65858-a-few-questions/#findComment-1231294
Share on other sites

It you front wheel has been pushed back it is relitivly easy to fix - happend to a friend who slip into the gutter and pushed it right back so the wheel was rubbing. More then likly going to be the lower control arm. Dont know how much this part is but probs around $100. We bent it back - take the wheel off and have alook - it is tough steel and you will have trouble bending it back with a hammer or mallet etc. We did major bush mechanics and put half the control arm in a metal grate in the road and put a long peice of pipe over the top and bent it back gradually - I recommend buying the part caus it will always be a little out- Thats if this is even the problem... I will try and get the pic off my phone of the part... Hope that helps abit - cheers

Link to comment
https://www.sau.com.au/forums/topic/65858-a-few-questions/#findComment-1231444
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...