Jump to content
SAU Community

Wolf3D V4 tuners ? who do u reccomend ?


Recommended Posts

I gave up tring to find someone who was confident to tune mine R33

So I sold it, and just fitted a Power FC like all the other cows in the heard.

Try mercury motorsport, they have done a few.

hey thanks darren...will check that one out...but i dont think he has a dyno though.. that's where nathan took his to tune his EMS on the startlet...but will check that one.

i was hoping Mercury would be able to tune them...i was wondering if they have all programs needed or i still need to bring mine that comes with it ?

thanks for all the help guys....it seems like only a few people here uses Wolf 3d hey ?

I'll give another vote for Matty Spry at PITS. He's good, and damn reasonable too. I was only charged for 2 hours of tuning (at a discounted rate anyway) when he'd spent over 6 hours on it without being able to get a good result power wise. Turns out another company had buggered something up, so it wasnt even his fault but he still only charged for a very reasonable price.

Put it this way, I opened my wallet and pulled out money to pay 4 times what he ended up charging... I was pretty chuffed :)

Also the reason PowerFC is more popular than Wolf3Dv4 is that PowerFC is much better at copying the stock ECU for things like idle-up with A/C and headlights, climate control unit, etc. Wolf has better options for things like outputs and inputs of various devices, including (I believe) MAP sensors. PowerFC makes another version (Called the PowerFC Pro or something?) which is just a PowerFC with the ability to run a MAP sensor instead of the MAF sensor.

Yep he can definately do the Wolf... A mate on here had his done there... He is located on the Gold Coast... Ring him for the address...

Matty has been tuning for a looooong time... Previously from Chiptorque... I've seen him work some wonders...

Yep he can definately do the Wolf...  A mate on here had his done there...  He is located on the Gold Coast...  Ring him for the address...

 

Matty has been tuning for a looooong time...  Previously from Chiptorque...  I've seen him work some wonders...

Hes not too bad, hell if he can fix Andrews car!!!

I wasnt sure he could do wolf, but that confirms that he can. At least give the guy a ring. Techincally tho, all of the systems are much of a muchness, if hes good at one, hes going to be good at another, its just if there is a problem somewhere is when things get slightly trickyer trying to find out what special feature to use to fix the problem.

With the popularity thingy tho, the wolf V3 wasnt so popular, now the V4 is out they seem to be doing a lot better, especially as they now have the plug in (like pfc) version, it seems its a really big insentive, really it means no one can bugger up the wiring, unless it was already like that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...