Jump to content
SAU Community

Recommended Posts

Hey all,

The steering in my R32 groans terribly when turning at low speeds and is now accompanied by a worrying (but fortunately occasional) thumping sound when you rock the wheel back and forth around the centre point while stationary.....The pump doesn't seem to be leaking, and I've tried adding Nulon power steering treatment which seems to stop the noises for a couple of months, only to come back as bad as it was before....Any ideas what might be causing this?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/66434-power-steering-woes/
Share on other sites

Hey predator, thanks for the response! I think you may be right, I had a look under the car last week and noticed the boots were a bit oily....I thought it might've been coming from somewhere else though as I don't seem to be losing power steering fluid or at least if I am it's certainly at a very slow rate..

hmmm, any idea much a reco R32 steering rack is likely to cost and where would I find such an item if I need one?

Hey, while we're here - my front brakes also creak really bad when I push the pedal in (I've got the std 4 piston sumitomo calipers), do you reckon my calipers might be stuffed as well? My discs and pads are quite worn, but I wouldn't expect them to cause this noise...

thx!

RaserR - you'd probably need it checked out properly by a suspension place.. But a new rack is around the $200-$400 mark from what I've seen. A good place to source them cheaply is from somebody that has a half-cut ... and just wanting the engine or whatever.

Its a bit of a job to replace them as you have to remove a lot of the steering components to get to it so a few hours labour ontop of the rack.

My brakes creak a bit too.. but they still seem to work pretty nicely so I wouldn't worry about it too much.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...