Jump to content
SAU Community

Recommended Posts

Hey guys,

Got my air con regassed 2 weeks ago after it was drained in Japan. Had it leak tested, etc and it was fine. Now the air con is warm and there's no gas in it. Took it back to the guy who now says the metal line from the firewall to the compressor is stuffed and leaking gas?

Wouldn't this have shown up on the leak test? How does a metal line leak anyway?

Every now and then I could smell gas coming through the vents and the dash just below the centre vents would get condensation on it. How would the gas get into the vents themselves? How do I fix this, its drving me nuts.

cheers!

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/
Share on other sites

my guess it's the tx valve metal lines dont leak unless they are corroded or bent my advice is to go to the guy who gassed it and let him know that there was a leak in the cabin of the car and it all most killed you say you just spent two days in hospital because of it. the gas is very very dangerous maby he will fix it for free ha ha

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1237592
Share on other sites

R134a is not dangerous to u so on't worry about breathing it (I wouldnt do it for fun though). The alloy pipes very rarely leak, unless some dumb arse work hardened it I would take it someware else as there are plenty of other areas to look at. Like the oring used in R12 system may be stuffed and the flexible lines arent designed for R134a.

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1241592
Share on other sites

yeah, think i'll take it to someone with more of an idea... I can't hear the compressor kicking in either I just realised so it may be something along the lines of a post further up the page of a temp sendor for the refrigerant.

I've checked all fuses and stuff, so I think this may be the problem. I'll take it in anyway...

cheers for the help guys, I don't think I inhaled too much gas so hopefully i'm okay :P

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1243017
Share on other sites

Yeah eveything is dangerous, they changed to R134a beacuse it is generally environmentally and humanly safe in reasonable quanities unlike R12 where if u were to inhale it though a lit cigarette it was the same effect as inhaling Mustard gas. I am sure the 500g inside a system would do absolutly nothing.

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1246738
Share on other sites

I guess he assumed all was ok because it was drained at some time. Not leaked.

Mine was fine then over a period of time it began to loose its icy coolness.

Eventually cooling the air so it was only slightly cooler than amb air and thats where it stayed. This happened slowly.

Initial tests showed there was no leak as it was holding pressure and appeared to work well.

This is why I had a 1/4 charge with dye (~$38 from memory) and told to drive around on it so the leak will show up easily.

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1246829
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...