Jump to content
SAU Community

Recommended Posts

Price: $10,000

Kilometres: 110,000km

Colour: Gunmetal grey/Needs respray

Transmission: 5 speed manual

Rego Expires: October/November 2005

Features: 18" Roh Drift R's, Alarm/imobiliser, Brass clutch, Hicas lock kit, spares avaliable

Pictures: Will be posted by sunday

Problems/Repairs: Car needs a respray, right rear quater needs repair after a hit and run, needs a new battery stand in boot

Reason for sale: Purchased a Mazda 808 and need to make room, also lost interest in finishing the car off

Link to comment
https://www.sau.com.au/forums/topic/67612-1993-r33-gtst-10000/
Share on other sites

So it's been in a front ender as well?

The car was hit on the drivers rear quater by a towbar and thats shown in the picture. THATS ALL, no front end collision anyone who comes to look at the car will be able to tell this. The reason for the different coloured front end is because it had a bodykit which is now removed and i needed to buy stock bonnet and front bar, and white and silver is what i could get.

Any questions dont hesitate to pm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...