Jump to content
SAU Community

Ffs! Cheap! Some1 Buy My Clean Modded R33......urgent!!!!!!

Veilside R33
 Share

Recommended Posts

Veilside R33 Veteran

Veilside R33

Posted
Posted

OK I'VE HAD IT!!! I CANT BELEIVE MY CAR HAS'NT SOLD!!

its been in the paper for 3 weeks and not even a phone call!!!

so it has to go NOW! it was going for 21.5k BUT ITS NOW DOWN TO 18K AND STILL NEG.

There is'nt a thing wrong with it that i hav'nt listed, its very clean, very very well looked after and i simply have to have it gone, im in a new career in real estate and im buying a lancer and need to get it very soon and my licence has just been suspended.

I dont want any time wasters or tyre kickers, if your serious let me know, come and check it out.

R33 is for sale, its a genuine reason. Ive owned the car since early February 04 it was in great condition when i bought it and was lovingly looked after by its past owner and more so by me.

here are the Details:

1993 R33 Gts-t

just clocked over 101'000kms yesterday

was always serviced by its past owner and it has just had it major 100km service done.

all electrics including sunroof

air conditioning

MODS

ENGINE

2.5l turbo, mines computer

HKS series 1 SSQV BOV

3" full turbo back exhaust

Apexi super intake

Trust phneumatic boost controller with in cabin boost control dial (currently set at 12psi)

Suspension and clutch

Lowered springs and sitting at exactly 10ml at its lowest point

I also have the factory springs and a set of R33 GTR superlows that will fit (superlows will come with the car if its sold at the right price)

exedy heavy duty ceramic bottun clutch, only 4000kms old

BODY

Nismo front bar with carbon fibre inserts

front bar has been completely silver meshed

High Bomex rear wing

RIMS

GENUINE Dished Veilside 17's, i have only ever seen 2sets of these in australia, and with crappy tyres they retail at just under $4000, i have just had 2 brand new front tyres put on.

INTERIOR

Interior plastics resprayed in creme, also including a pillars and rear section.

Drift handbrake

Aftermarket pedals

New black leather gear boot (will also replace handbrake boot in matching black if the car is sold at the right price)

Nismo gear shifter

STEREO

Schneider full flip face head unit

SECURITY

complete alarm including central locking, exterior shock and motion sensors, interior microwave sensors, 3point immobiliser, boot and bonnet sensors also, panic feature, car finding feature and a few other functions.

now for the imperfections. thanks to quikeze towing my left rear pod has been cracked, you will be able to pick up a cheap 2nd hand pod for around $50 and attach it straight on. Im being open and honest about the imperfections but it is in very good condition both mechanically and physically (appart from the pod) car was defected a few weeks ago, but has passed a full inspection, rear tyres are bals but i have a nice, near new set of dunlops to go on.

at the moment thats all i can think of regarding mods etc, but i can honestly say im going to miss this car dearly.

here are the pics, im hoping for a quick sale and not much fussing around.

price is $18'000 neg.

http://www.pbase.com/veilsider33/image/36997743

http://www.pbase.com/veilsider33/image/36997788

http://www.pbase.com/veilsider33/image/36997794

http://www.pbase.com/veilsider33/image/36997827

http://www.pbase.com/veilsider33/image/36997980

http://www.pbase.com/veilsider33/image/36997974

http://www.pbase.com/veilsider33/image/36997974

http://www.pbase.com/veilsider33/image/36997984

http://www.pbase.com/veilsider33/image/36997986

http://www.pbase.com/veilsider33/image/36998034

http://www.pbase.com/veilsider33/image/36998037

http://www.pbase.com/veilsider33/image/36998040

if there is any other info you would like just pm me or reply here, and i'll get back to you asap, i do want it gone asap but that does not mean i want any stupid offers!

i honestly hope that the new owner loves, looks after and appreciates this car as much as i have and i know you'll get as much of a thrill from having it as me.

Andrew.

Giffo Proficient

Giffo

Posted
Posted

Gday mate

Would u consider a trade for my 99 Lancer, 1.5L manual, 11months rego, just serviced, a/c power steering and cd player... stock except cd player and some cash, let me know, thanks mate!!!

AlphA Grand Master

AlphA

Posted
Posted

Would you take $15'000 and include freight to Perth as I have a mate who would be interested.

Dont take offence to that price Im just going off my knowledge as my brother just picked up his 1994 GTST for $14'000 without bodykit.

Cheers.

PM me if you are interested.

Veilside R33 Veteran

Veilside R33

Posted
  • Author
Posted

hey guys: Alph thats no worries, no offence taken but it is well below what i'll let it go for, thanks for being so polite about it, alot of people are just rude when it comes to low offers, so thanks.

Giffo: most importantly how many km's? im now looking more towards a daihatsu sirion or deawoo lanos lately, purely because you can pick up immaculate ones with under 50kms for under 6k. Any ideas roughly what kind of cash adjustement your thinking of? basically im chasing a house deposit (hence why im looking at Sirions becasue they are so cheap) so im not sure if a lancer is on the cards anymore, let me know what you think, pm me if you'd prefer.

Veilside R33 Veteran

Veilside R33

Posted
  • Author
Posted

actually i've never run it on 12pound. My appologies, at the time of writing the ad i had just installed the trust b/c and was setting it to 12psi but the way we connected it was wrong so when we tested it, it didnt change the boost, and i could'nt be bothered switching the hoses around so i just turned it off, and thus never ran higher boost. So it is still only running the stock (it is 7 or 5) psi.

Im sure the b/c works but i just never got around to changing it. But its a phneumatic b/c so if i was going to run higher boost i'd just put in an EBC.

But if the car sells for 18k (or close to it) i'll buy an Apexi EBC and have it installed before sale for whoever buys it.

  • 2 weeks later...
Veilside R33 Veteran

Veilside R33

Posted
  • Author
Posted

no no no i think your all missing what i just said, this is the part where someone says...."Holy sh*t, i cant beleive your letting it go for this price, i'll take it!!!"

But thats ok cause i forgive you, just make an offer now and all will be forgiven.....

Veilside R33 Veteran

Veilside R33

Posted
  • Author
Posted

im going to be getting something fairly new and cheap with low km's (like a lanos or daewoo matiz) so if its something like that then im definately interested. what is it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...