Jump to content
SAU Community

Recommended Posts

guys,

Heres some details:

1993

Fully built 4G63 (galant vr4) motor, 2litre using all HKS parts (pm me for details on the motor)

all work done at xspeed in myaree

autronics SMC engine managment

18inch ADR rims

6piston ALCON front brakes

Falken FK top of the range low profile tyres

3 HKS direct bright gauges

Blitz dual SBC (2 bar)

omp rally steering wheel

GT30R ball bearing turbo (600hp)

HKS gt2 60mm wastegate

king springs, koni adjustable shocks,

suspension has all new bushes.

full evo3 bodykit and evo3 copy fibreglass bonnet

Lots more that i cant think to list...........

Car made around 350awhp on about 1.4 bar of boost. The motor is built to handle 2bar safely. It also ran a 11.9 at 121mph on the low boost setting of 1.4 bar on 18 inch wheels and street rubber, with 1.9second 60 foot times, definatly a low 11 to 10 second package.

PM me if genuinly interested and i can forward on detailed photos

asking $35,000 FIRM with brakes or $30,000 without alcons.

Link to comment
https://www.sau.com.au/forums/topic/67969-fs-gsr-highly-modified/
Share on other sites

Private Sellers:

* If you have more than 1 item to sell, post them all in the one thread

* No EOI posts (expression of interest). If you post in the For Sale forum, then the item(s) is for sale.

* No posting on behalf of friends. If your friend wishes to sell something, tell them to join.

PS: Nice car I sold my GSR a few years ago for $22k with about half as many mods as this one, Id say your asking a good price however. Nice cars arnt they!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...