Jump to content
SAU Community

Help Me !!!

BiZzReVhEad

By BiZzReVhEad,
in General Maintenance

 Share

Recommended Posts

BiZzReVhEad Community Regular

BiZzReVhEad

Posted
Posted

really Need HELP ... if u can help.. i just got my car bak from the auto elec to replace my alternator and i just got it bak and went to take it home only to find its running like a DOG box, as soon as i hit 3000rpm or when turbo kicks in it starts to coff and splatter and sometimes just stop altogether , it sounds a lil like a fuel issue but i have no IDEA wat it is .

Its got no balls and sounds like it struggling to get anywhere past 3000rpm . the idle sounds a lil out too i really dont know what happend , it was only an Alternator after all nothign special ..

What do i ask the Auto elec to do ? or wtf is WRONG wif it ?

Do i need a Dyno tune again or somthing ?

I wouldnt think u would need to tune your car again after a alternator change .

I am really pissed off at the moment and need some help on wat it could possibly be or how i would go about fixin it ?

Any1 had a problem like this PLEASE HELP !!!!

Link to comment
https://www.sau.com.au/forums/topic/68289-help-me/
Share on other sites
BiZzReVhEad Community Regular

BiZzReVhEad

Posted
  • Author
Posted

Damn u ppl HELP ME! ...

They auto didnt call me bak the sun ova A! .. the chick past on a msg sayin that the ecu might take a while to relearn its settings or wateva and it will run ruff for a while of normal driving !?

I am that annoyed here its the long weekend and i aint got a car ( that goes ok) . They were all rdy to leave for there GREAT weekend but the Auto elec has no care about it .

I have to wait till tuesday NOW!..

Do u think they ***d my Coils , leads or wat ??

IT WAS FINE BEFORE THEY PUT A NEW ALTERNATOR IN THE LOOSERS

DONT GOTO ROADWAYS AUTOELECTRICALS they suck!

Link to comment
https://www.sau.com.au/forums/topic/68289-help-me/#findComment-1266586
Share on other sites
BiZzReVhEad Community Regular

BiZzReVhEad

Posted
  • Author
Posted

WAIT A MINUTE!!!

THE LIL PRICKS!!!

I just done a small investigation on my engine bay and found that the piping was loose to the intake plenum . The loosers didnt tighten the Hose clamps up and boost was leakin EVERYWHERE. Thank god for dave :) SPARKI UR MY HERO !:D

Oh and its ok i dont need ur help anymore so NErrrrrrrrrrr

Link to comment
https://www.sau.com.au/forums/topic/68289-help-me/#findComment-1266634
Share on other sites
Sumo Mentor

Sumo

Posted
Posted

If I had customers like you I think I would like to change trades aswell.

Getting angry doesn't fix the situation at all, And im sure it was just a honest mistake. I once put a return oil line off a vacuum pump on to an altenator and did not realise it had the slightest crack, and it sprayed oil everywhere. But we were all adults about the situation and it got sorted out.

But if your going to act like a child well, the trader will eventually tell you to piss off and take it to a mechanic because its out of his field - whether it is or isn't.

Cheers

Sumo

Link to comment
https://www.sau.com.au/forums/topic/68289-help-me/#findComment-1267411
Share on other sites
BiZzReVhEad Community Regular

BiZzReVhEad

Posted
  • Author
Posted

U tell me how u would feel if u had half ur Plenum Hanging off by just the hose then pay for a BS repair ...

I dont care wat u think if mechanics/Auto electricians cant Check over and do their work properly before handing it to the customer i wouldnt be in that FIELD either.

Be good to see u without a car over the Long weekend because of someone not puttin everything bak together . It coulda been anything.

Link to comment
https://www.sau.com.au/forums/topic/68289-help-me/#findComment-1267521
Share on other sites
Gemini Contributor

Gemini

Posted
Posted

All this guy is saying, is that they should check the car before giving the keys back. I would be pissed to.

Anything could have happened while driving back home and if it did, i doubt that the mechanics would have owned up to it. If they are honest they might but chances are they would say "it was like that when you brought it here"

Link to comment
https://www.sau.com.au/forums/topic/68289-help-me/#findComment-1268546
Share on other sites
BiZzReVhEad Community Regular

BiZzReVhEad

Posted
  • Author
Posted

yer well its all good :)

Thanks for your comments guys . Sumo (auto elec :thumbsup: ) and i have spoken and we have come to an agreement that it was an unfourtunate incident that lead to my car being 'Incomplete'.

Anyway, yer im not to happy but its all good i have ppl i can turn to for ideas and theorys of wat i can do to diagnose the problem.

Car is running great now :rofl: the dash lights and everything has gone more bright and im sure the spark to the coils is much more fluid. . All i need now is my turbo upgrade :) i dont wanna have to pull out the credit card :)

Happy easter Every1 !

Link to comment
https://www.sau.com.au/forums/topic/68289-help-me/#findComment-1269368
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      What about if you just give it direct 12v and earth?
    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...