Jump to content
SAU Community

World Record....?


Recommended Posts

Guest DIRTgarage

In the Dyno shootout comp. yesterday, TWO.06L recorded a mind blowing 627bhp.

which is 467kw. Is this a new World Record for a GTR running 2530 turbos, or for that matter low-mount turbos alltogether. Jim from Croydons is sure it is but we would like to find out for sure. By the way nitrous-oxide running cars do not qualify and must be running on jap pump fuel or equavilent.(we ran VP 103)

Link to comment
https://www.sau.com.au/forums/topic/68548-world-record/
Share on other sites

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Chunky. Not bad for what I heard was a stock bottom end :P

Oh and I doubt that Jap bowser fuel is as oxygenated as the VP gear, how much timing did you end up winding into it?

Good results anyway, time to do some benchpress practice with gearboxes :)

Link to comment
https://www.sau.com.au/forums/topic/68548-world-record/#findComment-1270962
Share on other sites

Guest two.06l
Chunky. Not bad for what I heard was a stock bottom end :P

Oh and I doubt that Jap bowser fuel is as oxygenated as the VP gear, how much timing did you end up winding into it?

Good results anyway, time to do some benchpress practice with gearboxes :)

4% more than what we had?? I think?

don't think we have ever said it's a stock bottom end? We will have different box again for next event, should be better.

Link to comment
https://www.sau.com.au/forums/topic/68548-world-record/#findComment-1270985
Share on other sites

ill try but im sure it was like 2 yrs ago since ive heard of it

could have been low mount 30's or 28's... cant remember off the top of my head. was almost unbelievable cos u wouldnt think u could low mount those bigger turbos.. but aparently was.

at this stage uve got the record n we will stick to that :P

Link to comment
https://www.sau.com.au/forums/topic/68548-world-record/#findComment-1271071
Share on other sites

or as a quick reference:

Posted by: Guy R

Here are the results from the low-mount turbos, on mine and Henry's car that we both own!

My car (2.6litre, wild cams)

Max on 2530s - 560bhp

Max on T618Z - 672bhp

Henry's car (2.8litre, mild cams)

Max on 2510s - 554bhp

Max on T517Z - 635bhp (only 1.5bar)

Conclusion, from 2 cars on rollers:

The HKS GT2510/2530 will struggle to get 600bhp.

The Greddy T517Z and T618Z are noticeably bigger, still low-mount and easily capable of flowing 600+ to 700bhp.

The above are facts as tested on a MAHA dyno in England.

Guy

Link to comment
https://www.sau.com.au/forums/topic/68548-world-record/#findComment-1271075
Share on other sites

Hey now that you mention it....

Phoenix's Power (http://www.phoenixs.co.jp/bigsite/home.html) have got a few near that power figure. From their power rankings:

1) BNR32 - R34 N1 turbos, PowerFC, cams etc : 645.5PS (636.6HP/474.7kw)

2) BNR34 - HKS GT-SS, PowerFC etc : 634.1PS (625.4HP/466.4kw)

Will check out some others.

Link to comment
https://www.sau.com.au/forums/topic/68548-world-record/#findComment-1271084
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
×
×
  • Create New...