Jump to content
SAU Community

What is our State Doing?!?

caminperth

By caminperth,
in WA Wasteland

 Share

Recommended Posts

Boostzor Grand Master

Boostzor

Posted
Posted

I lvoe how they come up with issues like this as if they were new> how long have ppl been chewing gum, like 50 years or something? and as if the proceeds are going to go to these restraunteurs they will just keep it and use if for more innane and ridiculous projects like more roundabouts and speedbumps or some crappy ornaments that nobody needs or wants.

Lets get into govt and sort this state out. WA is free and easy lets try and keep it that way.

Oh and if your one of these idots sticking gum under tables, just jam it in a coffe cup or something instead. Out of sight is not out of mind.

32vspecII Mentor

32vspecII

Posted
Posted

does anyone actually go into perth if they can help it ? i mean its dead . its like dirty and scungy , theres all deros and the alley ways smell of urine and vomit and people ask you for money . and its totally boring , all the shops are stupid and there closed most of the time .

basically i think all perth city council wants is high priced yuppie appartments so they can get buckets of residential stamp duty and everything else can get screwed

ASYLUM Community Regular

ASYLUM

Posted
Posted
Haha in japan at some bar in tokyo they sell plates for you to throw at a brick wall to release some stress / anger relating to work / whatever.

chewing gum? i went through two packets at MoS...

i guess if they do end up banning it will we see more dummies and candy kids at raves? :)

ASYLUM Community Regular

ASYLUM

Posted
Posted
Dummies? like pacifiers? dont hink ive seen one of those before or maybe i just dont remember, does the dummy have something in it or its just for chewing?

just chewing, the latest craze-well not that recent- seems to be taking UK club culture and turning it into Perth Rave culture :)

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • Duncan
      NC MX5

      By Duncan · Posted

      On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...