Jump to content
SAU Community

Recommended Posts

Howdy all.

I ran my Stagea at the local drags last weekend for a bit of fun. The best time I could do was a 16.72 at 130 clicks I think. My slowest was a 16.88 so I was pretty consistent. My reaction times were .5s and .6s.

My question is.

What should I do to my wagon to really get her hopping without losing and preferrably gaining some reliability?

I already have a full 3" exhaust, rampod and an SAFCII my Profec B Spec II should be here next week. I should also have a front mount and a bigger transmission cooler by the next meet, also a carbon box for my rampod.

Is there anything else I should consider?

Id love to get the valve body upgrade installed. If I bought one could I install it myself?

Oh and would it be safe to have my car running 11psi for the whole run? Should I start at a lower setting and then switch it up?

I think thats all I wanted to know.

Any help would be fantastic.

Thanks guys.

Zane.

Link to comment
https://www.sau.com.au/forums/topic/69809-dragin-the-wagon/
Share on other sites

My 10 cents (race meeting this weekend, have to move it)

I have been using 10 psi for quite a while now, I can get 7 psi at max stall on the standard torque converter (around 2,300 rpm) holding it against the hand brake and the foot brake. I don't worry about reaction times, it has no effect on your ET.

Note that I have zero mechanical mods, just the IEBC and the DFA. The exhaust and intercooler upgrades will make a big difference.

How were you launching yours?

Link to comment
https://www.sau.com.au/forums/topic/69809-dragin-the-wagon/#findComment-1291134
Share on other sites

Went to Adelaide International Raceway last night and did two passes. I managed a 15.2 and then a 15.0 at 91.3 mph. On my second run I went up against a Subaru Legacy GT with similar mods to mine, (full 3" exhaust, R34 GTR intercooler, 10psi, exh. cam gear, air filter, s-afc II). He ran a 15.5 but still won due to a much better reaction time.

It was all a bit of a learning experience for me, so I'm hoping that with some practice, a little weight reduction and a slightly better tune, a high 14 will be achievable.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/69809-dragin-the-wagon/#findComment-1303946
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You now say stumble, but you said cut out before. Will it slow rev through the cut/stumble? What gap were your spark plugs set to when you them in?
    • I had double clamped all the pipes but I checked them over any way, everything tight and secure. feels and sounds like a electrical short/failure, as it is an abrupt and aggressive stumble, that instantly comes and goes right at 4k mark...like clock work fuel pump and filter are new new coils and plugs injectors where cleaned and tested 200 miles plus ago no black smoke cleaned MAF   same results, other ideas? some other sensor?  
    • Yes, just without the annoying use of the word hybrid. We stopped using that term 20 years ago when we realised it meant different things to different people. Even "highflow" can represent more than one way of achieving the goal of getting more flow out of a turbo. But at least it says what it does on the box.
    • OH, when they say "solid buckets", I always interpeted that as "shimless". (Which is not the same as the "shimness word I invented above to represent the same idea that the buckets act as shims also!!). Still the same problem though. So it appears that buying a "kit" from Tomei is a two step process. Makes sense. Doesn't make sense in the context of a "kit" though.
    • Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
×
×
  • Create New...