Jump to content
SAU Community

Recommended Posts

nik.. i ran 2 15 sec pass's for ya man ... where was ur daewoo lol

ahh wasnt a bad nite... got a lot of problems goin on with mine. nothing a few more hours wont fix.. had my B&M shifter cable al farked up.. wasnt selecting 2nd but when it did it droped it back into 1st few mili seconds later.. still managed an 11.7 with 1st gear and part of 2nd hahahah ohhh and i did a 12 flat with the crank angle sensor goin out on me half track lol rolled it in for a 12.1 i think it was.. ... that wasnt really fun tho...

although was wrapped with my 60 footers.... 1.53 was my best.. ( gotta love the transbreak. **** gives u a buzz when u launch at 18PSI lol )

mite fix the shifter up and turn the power up on it next time.( wouldnt mind a shift lite as well.. gets kind of hard looking down at ur dash... wanna work out all my kinks b4 i chuck in some c16 and let it rip out 35psi :-)

seen a few of ur skylines running tho.. r31 nismo... didnt mind ur car.. its moved top end... nic3e screamer pipe btw :-) there was a black R33.. that seemed like it had a bit of power there... spewing i couldnt race when it started getting cold..... nik.. i didnt see ur daewoo tho.. im pretty pissed at u..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have Enkei RPF1s in 17x8 that are 7 kg. That's about as light as it is possible to get without going forged. Apparently 18x9s are only <1kg heavier. Just the wheel, obviously.  
    • Anyone have this kit laying about gathering dust.. Preferably text me on 0424 581 117 as I rarely get on here these days...
    • Nah, nothing formal, just open track days. Mostly small and tight circuits but I would like to get back out to Eastern Creek at some stage.
    • What type of track driving will you be doing?  Do you have a set of class rules you need to abide by that will limit your rim / tyre width?
    • I've been reading a lot lately about unsprung weight and how beneficial it can be to reduce it for driving on the track, given my semi's only have another day or two in them I am throwing around the idea of some lighter wheels and a square set up. I have 265/35/19's and 245/40(?)/19 Federal 595's at the moment. The wheels and tyres are super heavy. I looked up my wheel weight online and got 14.5kg naked. Not sure if this was 8.5 (front) or 9 (rear) but that's a lot. I have also been reading about the benefits of a square setup. Much better rotation and potentially less understeer.  When I throw these together I'm thinking about a 17x9 or 18x9 square (preferably under 10kgs per wheel) with 245 or 255's. I can get some cheap 17x8.5 BMW M Sport wheels, they weight 10.5 kg's each but at 8.5 wide could probably only get 245's on them? I know they come with 255's from factory but semi's are a bit chunkier. Otherwise it will be aftermarket wheels in a 9" width. Most of the other BMW wheels are heavy unless you pay a squillion dollars for some M wheels.  Although, the E46 M3 Style 67's could be good but I'd have to buy 2 sets to square them up.  My car has a tickle over 400hp and about to put an LSD in also, is 245 a little thin for a square setup? It kinda feels that way to me. Also, is there any tangible benefit to having 18's over 17's? Is the footprint demonstrably bigger? From those of you who went to light(er) wheels after heavy buggers, did you notice it much?
×
×
  • Create New...