Jump to content
SAU Community

Recommended Posts

the gearbox got damaged the friday before autosalon when we made 1068rwhp

we new we overheated the auto but still took it to autosalon anyway

it should be together in 2 weeks for testing for jamboree

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

im aiming for nines but traction will be the only limiting factor

subzero did all the engine work and tuning

55717077

i actually live in bundaberg which is 5 hours away

but subzero build the best skylines

and supras

Man thats a big turbo on your Car Jason.. FMD... What are the specs on that sucka... Do you use your car as a daily driver 'atleast drive once a week'.. gezzzz with a car like that it'd be so hard not to speed, at least you know you could truly out run / gun cops / any car on road...Take the plates off one night & do some Get Away in Stockholm runs.... :crazy: | haha

I think the GTST from subzero with the plates TRY9 made 750rwhp and ran 9.4 at 150mph and this has 1068rwhp so this should be good enough for an easy 8sec pass if it gets traction, if not it should still run mph into the mid 150 zone cruising.

Animal hp cant waitto hear the et's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...