Jump to content
SAU Community

Recommended Posts

not sure probably they have done heaps of skylines

i got it done sounds good not to loud ive got the silencer i dont think i will need it

i got 168kws on the dyno it stop coz of the stock intercooler was getting too hot

aww well looks like i have to save up for one now!!

its a risk but i guess its the same as any other mod

i've got a pretty loud exhaust, i havent tested it but its pretty loud

i drive everywhere and the few times, i've been pulled over for "RBTs", i get questioned more bout my pod filter than the exhaust

Also there is different types of exhaust notes. Some drone and its very obvious and loud (also rattles windows) others are not as noticable. 95 is quite loud though.

To answer peoples questions, they can tell the db on the exhaust because its tested in advance. However those numbers are based on a stock car, so if you have aftermarket turbo etc etc the noise will go up!

If your after a legal exhaust, never buy one on numbers. Go to a shop and get one custom made.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...