Jump to content
SAU Community

Recommended Posts

Hey guys,

got a little query and was wondering if someone knew or could help me out.

Are gtr bonnets a direct fit with gtst on the r33?? If not, what are the variations? Is it the width that varies or the bonnet latch doesnt line up etc???

Ill be picking up a carbon bonnet on sunday, and just soughta need to know incase it was meant for a gtr, but pretty sure its for a gtst???

Any ideas???

Link to comment
https://www.sau.com.au/forums/topic/74150-r33-gtr-bonnet-same-as-gtst/
Share on other sites

I beleive that the R33 GTR bonnets are a little longer (from the windsreen to the grill) than the GTS.

Thanks for the info, ill get some measurements off the seller before I pop round... Kinda hard to take your car there to fit it up on the spot, dont really think u can drive without a bonnet :D

LOL

Please post when you check it out. For 32s at least the GTR bonnet is significantly lighter than the GTST one, and would be a neat way to save some weight.

Rang the seller and hes not too sure whether its for a gtr or gtst... So the results I get tomorrow, not too sure... However, hopefully the bonnet fits :) (Carbon fibre, supposedly non gtr)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...