Jump to content
SAU Community

Turbo Timers

J_Kosta
 Share

Recommended Posts

kezza Proficient

kezza

Posted
Posted
My current turbo timer dead.......im planning to buy a new one and i was just wondering if there is a difference between them? if so whats the best one's to buy?

They are much of a muchness bro, Is the old one an auto countdown?

I had an old school one that just did the 1 to 5 min countdown.

I took it out and fitted a HKS type 2 timer, it does the auto detection of how long it should do for run down time!

also has a speedo, and rev meter, so it can do top speed hold/max rpm hold/QM times. what ever ya want.

it wires up with just a few more wires, one to the ECU for speed sensor, and tac sensor. and another to the handbrake!

and the timer works out how long to run by the revs and adds it all up to give a countdown time!

SO HKS type 1 for just a great timer, fully auto. but thats all it does

OR HKS type II for all the good shit :)

I can get them direct from japan for around $200 for the type 1

and $350 for the type II

I hope i helped in some way!

kezza

Link to comment
https://www.sau.com.au/forums/topic/74296-turbo-timers/#findComment-1365153
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...