Jump to content
SAU Community

Recommended Posts

I've been following this issue on my R32 for sometime now ever since I first got it.

Basically the HICAS light comes on after I travel a certain distance. It has made me wonder because it doesn't come on after a certain period of time but a certain distance everytime after first travelling in my car. Leave it to rest for a while and it resets itself and the same thing will happen again. Also I have no clue about HICAS diagnostics either.

One thing I have found though, is that my HICAS never actually seems to work. And I've never actually had the 4WS kick in on me before. But the thing is that I don't have a locker bar because all the lines still connect into the rear steering rack and there doesn't seem to be any tampering with the HICAS ecu at all.

Is there any dodge way of eliminating the HICAS? Removing fuses? Cutting/crossing wires? Also people with the lock bars, does the HICAS light come on at all times or something similar to my case that after it travels a certain distance the light will come on?

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/75923-timed-out-hicas-issue/
Share on other sites

Scott, it would appear that your steering wheel is not centred (I'm guessing an aftermarket wheel) so the HICAS goes into disabled mode after about 6-7km. There is a sensor in the steering wheel to tell the HICAS where it is pointing and if it is not centred/doesn't move when driving it shuts down HICAS.

For more info on HICAS go to the tutorial in my sig.

well my boss kit is the right opne it fits straight on,.,,.. i think its the steering wheel isnt dead centre problem and i need an alignment... so if i just adjust my wheel so its perfect straight this will fidx it>??? i still dont see how just taking the steering wheel off affects the sensor.. damn nissan

I too have the same problem, but not after any set time or distance.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered.. :confused:

I too have the same problem, but not after any set time or distance.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered.. :confused:

I too have the same problem, but not after any set time or distance.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered.. :confused:

I too have the same problem, but not after any set time or distance. My handbrake light does the same. Neither everyday, nor at the same time, just every so often. Before you ask, yes my h/brake is all the way down.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered..

:confused:

you can disable the HICAS by unplugging the KYB motor located in front of the rear steering rack. I would advise against it as it makes steering much heavier. You will know if the 4WS has been working or not because of the difference it will make once you unplug it. The light may stay on constantly though, can't remember.

The problem has been covered a hunred times :cheers:

Your problem is likely to be:

a) A lack of powersteering fluid.

B) An incorrect boss kit.

c) An incorrectly fitted boss kit.

Just because the boss fits, doesn't mean its the correct one. You need a boss with holes for the HICAS lugs offset at about 2AM and 8PM: see this tread:

http://www.skylinesaustralia.com/forums/sh...&highlight=boss

I also had an issue with the piping on the powersteering resevoir coming loose. I pulled the hoses up as high as possible (which was bloody hard) and then replaced the standard clamps with ring clamps.

Lucien.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...