Jump to content
SAU Community

FS: 02 Subaru Liberty B4

pontiff
 Share

Recommended Posts

pontiff Enthusiast

pontiff

Posted
Posted

Hey all,

The lease is up on my B4 in so its time to find someone to buy it.

Its a standard MY02 B4, Blue Mica, 5spd manual, located in Melbourne. For those of you who dont know what a B4 is I will elaborate

- 2.0lt 190kw Twin Turbo (sequential VF32 & VF33)

- Recaro Blue / Black Leather interior

- Mcintosh CD Stereo

- 17" BBS Alloys

Car was a Subaru Australia executive car for its first 7,000 kms at which time I bought it, so I guess you could call me its first 'real' owner. While I have had the car I have had the following upgrades performed.

- Uprated Discs (DBA drilled & heat treated) and pads (RB74 and COMP-2) from RaceBrakes.

- Front Whiteline Strut brace

- Rear Cusco Strut brace

- Front and rear Whiteline Swaybars

- Whiteline Anti-Camber Kit

Car has 75,000 on drivetrain and 2,500 on the new engine. To cut a long story short Subaru have replaced the entire engine (and turbos) with brand new items ex-japan. I have the list of things replaced if anyone really wants to see it. Car has complete Subaru Glen Waverley service history. I have almost exclusively ran it on BP Ultimate, with an occasional tank of Synergy 8000 if BP is not available. Car has never had anything less than 98 RON fuel.

Still has 2 years of 'Subaru Assured' warranty remaining. Subaru Assured is backed by Subaru Australia but is not the same as a new car warranty. It is certainly better than those useless 'dealership warranties'. Engine has 2 years of its own from Subaru Australia.

It's a good clean example of an australian delivered B4 with rego until March 06

So if you want a car that will not give you an ounce of trouble yet still perform admirably then a B4 may be a wise move.

Cost: $32,000 ovno

Any questions or queries etc then please let me know.

Cheers,

Aaron

Link to comment
https://www.sau.com.au/forums/topic/76516-fs-02-subaru-liberty-b4/
Share on other sites
  • 1 month later...
pontiff Enthusiast

pontiff

Posted
  • Author
Posted
vf34 ey?

When I wrote that I was guessing because I was too lazy to look it up.. i have subsequently looked it up and its actually VF33 and VF32 .. sorry for any confusion ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...