Jump to content
SAU Community

4SALE R32 GTR dammaged engine

RX3 + R32
 Share

Recommended Posts

RX3 + R32 Contributor

RX3 + R32

Posted
Posted

hi all...

looking to see if theres any interest in my 32 GTR

has dammaged engine ie piston faliure on no.6 cylinder.

two ways i can go about it, as regardless, i want to get rid of the car.. either i fix it & then sell it, or as im doing now see if any one wants it now, so they can do what they wish to the eng to have a really tuff street car.

as most of you know it has a lot of goodies on it & will run the numbers down the track... as per date its run 116mph passes on 0.9 - 1.0 bar & best et of 11.86 on the brakes with only a 106mph on that pass. THIS IS A TUFF STREET CAR.

the car has nearly a years rego on it here in W.A.

it is fully permitted as i had a sticker on it two weeks ago, including permits for the 19inch rims!

ok so its the factory gun metal grey colour

19" fusion alloys (1month old)

alcon brakes

kazz mech diff

Tein super flex coilies

cusco front & rear strut tower braces

power fc & hand controller

os geiken twin plate clutch

R34 GTR N1 ball bearing turbo's, with hks wastegate actuators

aftermarket exhaust with stainless front pipes

large aftermarket Grex eng oil cooler

aftermarket intercooler (not sure brand trust or similar)

pod filters

Greddy ebc

Rsm

guages ... boost, exh temp, water temp.. all memory recall (hks & greddy)

new hks turbo timer

Tomei master cyl brace

nardi steering wheel

nismo aftermarket rear suspension arms

Tien adjustable front castor rods

Recent retro fit aircon system (fitted only 2weeks ago)

stereo:latest model pioneer MP3 player, subwoofer etcetc

full autowatch blue alarm, remote central locking.

Car is currently insured for 30k for ideas on value.

i will add more things as i can remember them lol.

**also what is already inside the eng is unknown

ie cams, rods etcetc

i will try to organise some pix if required later in week.

pm your interst or call matt after 5.30pm weekdays on 0403773057

Link to comment
https://www.sau.com.au/forums/topic/76904-4sale-r32-gtr-dammaged-engine/
Share on other sites
BMT Rising Star

BMT

Posted
Posted

Firstly, what year is this car built. That will determine how much this car is really worth. And secondly, if you are really keen to sell this then please list exact price you are after so that we all can judge what money you are actually after. 20 plus or so if very vague, so unless you post a rough close estimate to what you are after, then ppl interested can make reasonable offers. At the moment without knowing its not a 1989 model, then i would stand by 17,000 max as im assuming that it would be a 10 year old import under the old SEVS rules.

RX3 + R32 Contributor

RX3 + R32

Posted
  • Author
Posted

ok, headlights arent any differant as far as i know.

it is only a 89 model...

i would like to get 23500 for it... i was offered 17k for it on sunday, but that is not in the ball park, i have had other interest at 20k..

ive got two months to sell the car so im not in a massive hurry, but if the interest falls off soon i may start hunting for a low km import eng.. then if i sell it with a low km import eng with std turbo's how much do you guys think i could get??

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • Kinkstaah
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Kinkstaah · Posted

      You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • Dose Pipe Sutututu
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Dose Pipe Sutututu · Posted

      LOL.... you are correct there.
×
×
  • Create New...