Fitting new Rear steering (HICAS) Rack

[Sideways]

Hi Again

Has anyone fitted a new HICAS steering rack into the rear of a R32 ? (it's a Hydrolic setup, unlike the Electric setup of the R33's onwards)

My question is, after fitting a new one, do you have to bleed it somehow after putting in the fluid? and if so how?

eg. if you fit a new front rack you have to turn the steering wheel side to side until you get all the air out of the system...

So do I have to do something similar with a new rear rack.. like put the HICAS into DIAG mode and turn the wheel side to side??

any clues??

thanks

James

[meggala]

no not sure you can get a work shop manual for the r32 gtr for around $150 from jpnz there is a link on the main sdu site .

If Iwas you I would have replaced it with a solid bar you can get them from uas in sydney and you can looses around 10-15 kgs

meggala