Jump to content
SAU Community

Recommended Posts

My s2 R33 gtst is only running at about 3-4psi instead of the factory boost level. I can hear that there is a hole or some sort of leak somewhere near the engine.

Modifications include only exhaust and pod filter. I did have standard boost until this little problem.

I took it to a local exhaust place in brookvale and got him to have a quick look at it (after he told me he doesn't do turbo cars) and he said it seems to near the manifold. He recommened another local performance place called Joviant but unfortunatly there were closed yesturday and today.

I need to get it running properly before I start work at uni on or around the 7th Jan.

I've heard good things about Hills but have also heard they take forever and a day.

Does anyone know my what my problem is, and can they refer me to a perfomance mechanic near the northern beaches that doesn't charge like a wounded bull.

I prefer not going to the dealer in Manly I bought the car from. I remember him telling me there was a boost leak when he drove my car back from botany warf but said it was fixed. I guess he didn't do a good job or something because in the last week its come back and the car is out of warranty.

Mark

Which freeway was this?

If it was anywhere near Eastern Creek the other day for the track day I only saw the pink justjap car which stood out like an altar boy's errection. I also spotted a local GTR arriving at eastern creek as I was leaving (purple GTR with zila number plates - 400+ kw).

Sorry I seemed to ignore you (I didn't see you). I was more concered not ending up on some highway to hell. As mentioned in the eastern creek thread I had no map and was unable to find someone to follow. Thank God I saw the justjap car pull onto the m4 because I was traveling in the total opposite direction =)

I might have to get one of those GPS systems if I want to travel outside the safety of the northern beaches.

Sure it was me PVA?

Mark

Mark,I think it is your tube that runs to your BOV. Make sure it is connected all the way to the plenum chamber as the tube that comes of the plenum can be missed when putting back everything.

Give me a call and you can bring it round for me to look at.

Doc

Check the boost guage sensor near the brake powerbooster and see if the small hose has split.

I think the R33's are the same as the 32's in that aspect.

Does it still feel like it pulls the same or similiar?

If so that is what it is..

  • 5 weeks later...

hey dude, is it a boost leak or an exhaust leak?? coz if its dropped boost and the exhaust place has told you he doesnt fix turbo cars, i got my money on you have blown your manifold to turbo gasket.

keka18 you are correct.

In another thread I mention that I got it done at Envy Imports on the Northern Beaches. They charged me nothing to fix it because I have done business with them before and I also got a front/dump pipe + hi flow cat and they high flowed my turbo at the same time. They are also doing a FMIC for me within 2 weeks.

I've also got a leak at the muffler which they said to get fixed at any exhaust place, so when I get time (working 6 days a week to fund mods) I'll get that fixed too.

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Need to see other side of PCB in that area...ie; I don't see any thru-hole mounting, just soldered vias (smd zeners in SOT23 have 3 legs but only 2 are used, as reflected by PCB tracks)
    • 4 to 5 is fine. It will be slow, but that's better than blowing turbos. I don't have a PS pump idle up solenoid on my car, because... I think when we put the Neo in we retained my R32 lines. But.... From inspecton of the R34 vacuum hose diagram, you can see that the solenoid needs to be connected to the turbo inlet as source of clean air) and the plenum (as source of vacuum - which is the place for the air to flow to to cause the idle to increase). So 3 to 1 is VERY WRONG. 3 should go to either the turbo inlet, or the plenum. Follow the other hose from the PS solenoid and if it goes to the plenum, then your 3 goes to 2 2 would also serve as a bleed port for a boost solenoid.
    • Pull them out and pull more apart. You can't do shit with them still bolted to the floor of the car.
    • Yes it is. ZD1 is on the other side of the board. Where ZD1 is marked is clearly opposite a 2 pin device. Our 3 pin device here is not a ZD.
    • Alright, a little update on this... I called Fulcrum, who used to be the distributor in Australia. No Bueno, they don't service them anymore.  Called shock works, who don't service them but offered to dyno the shocks for performance, and suggested DNA in Sydney might service them.  Called DNA, who also do not service them and basically said they try to steer customers away from tein for this exact reason these days- there is just no support for them anymore apparently.  Both SW and DNA said they are a not necessarily a bad product, but they just don't service the brand or know anyone who does service the brand anymore.  So... I could keep calling around but at this point I think I'll probably just spring for the shockworks product, unless anyone here knows anything.  Cheers 🍻 
×
×
  • Create New...